DIY Alky kit and Turbo Tweak alky chip

[86BGN]

Everything you need except the wire and a LED.

Turbo Tweak alky chip for stock turbo and 42.5 009's
Carter pump
NOS fan jet nozzle
4 NOS jets 0.28, 0.30, 0.32, 0.34
NOS braided line
10 PSI Hobbs switch and vacuum adapter (set from the factory at 10 PSI but adjustable)
Coolant over flow with a ABS plastic bracket to mount to the factory fan
ABS panel for the ash tray with on/off switch and momentary switch, home made but looks nice
Relay

I was able to run 22/23 PSI with this set up using the 0.30 jet and probably could have ran more

175.00 for everything and I will ship the same day or next.

 

[turbo dave]

Sounds Like A Good Deal. Why Are You Selling?
Curious To Know What Turbo And Intercooler You Were Running?
My 86 Gn Is Still Stock- Only Owned It For A Month Or So. Think My
Turbo Is A Bit Weak- Fair Bit Of Lag. Considering Upgrade Soon- Any
Suggestions. What Kind Of Times Were You Running With This Setup.
I Live In Albert Canada- Would You Be Willing To Ship Here.

 

[86BGN]

Sounds Like A Good Deal. Why Are You Selling?
Curious To Know What Turbo And Intercooler You Were Running?
My 86 Gn Is Still Stock- Only Owned It For A Month Or So. Think My
Turbo Is A Bit Weak- Fair Bit Of Lag. Considering Upgrade Soon- Any
Suggestions. What Kind Of Times Were You Running With This Setup.
I Live In Albert Canada- Would You Be Willing To Ship Here.

I put a TA-49 on and am going to add a front mount IC, just thought I would try something different with pump gas only. With the alky I was running a stock turbo and stock intercooler and you couldn’t beat it for the money. I never made it to the track so no times, I am sure the car would have ran decent.

Let me know, I tried to upload pictures of everything but it didn’t take. I can send pictures of the parts if anyone would like. Also I have now idea about shipping to Canada? If it is not to big of deal its fine with me, I will split the shipping cost with anyone too.