Converter help for turbo

[JustG]

I'm looking for a converter for a pte 70mm turbo H-cover with a .82 exhaust housing 3 bolt. Car has ported big valve heads, 218/218 flat tappet, ported intake, built 200 trans, and slightly lightened. I'm considering a 9.5 vigilante 3500 single disk.

 

[kandc7]

Give dusty a call at PTC he will hook you up with the right converter..

 

[Mr.Spool]

I'm considering a 9.5 vigilante 3500 single disk.

i wouldn't consider this converter unless it had multi disk and I was going to lock it up wot.if your set on lockup i would recommend calling dave husek about his lockup converter.