complete mid 10 sec 109 motor and transmmission.
im going to sell as a complete package or if it doesnt sell as complete package i am going to part it out but as for now i only want to sell complete. the motor is in the machine shop having it checked before sale and found the #1 rod bearing with wear on it ,machinist said its caused by dry start from a fram oil filter we think so im replacing the rod bearings motor has about 20 passes on it .im building a small block twin turbo and need to sell this stuff to finish project thanks here what you get
webber racing iron heads with big valves
109 20 over block polished valley
20 over je pistons
polishied stock rods
all arp bolts
new gm crank may have to go 10 on rods
rjc gurdle
percicion 62 gtq
poston t-110 cam with gm lifters
cyclone double roller timing chain
60 # motoron injectors/ race chip
ported intake
percicion 70 mm t-body and plenium
rjc power plate
adj fuel pressure reg
coil pac and module
stock intercooler
new fly wheel
86/87computer (not modified)
co2 intercooler kit with bottle
mass air translator with 3" mass air
9 " k&n air filter
scan master
turbo saver
bare stock intake
stock upper dog house with stock t-body
sx fuel pump and filter
turbonetics waste gate
stock headers
bfr transmissinwith shift kit and centry trans brake
3200 atr carr billet half convetor
OTHER PARTS INCLUDED
another 109 block standard
stock heads
delco coil pac
gm mass air
cam sencer with gear drive
and what ever eles i round up
EVERYTHING LISTED ABOVE 7000.00
im going to sell as a complete package or if it doesnt sell as complete package i am going to part it out but as for now i only want to sell complete. the motor is in the machine shop having it checked before sale and found the #1 rod bearing with wear on it ,machinist said its caused by dry start from a fram oil filter we think so im replacing the rod bearings motor has about 20 passes on it .im building a small block twin turbo and need to sell this stuff to finish project thanks here what you get
webber racing iron heads with big valves
109 20 over block polished valley
20 over je pistons
polishied stock rods
all arp bolts
new gm crank may have to go 10 on rods
rjc gurdle
percicion 62 gtq
poston t-110 cam with gm lifters
cyclone double roller timing chain
60 # motoron injectors/ race chip
ported intake
percicion 70 mm t-body and plenium
rjc power plate
adj fuel pressure reg
coil pac and module
stock intercooler
new fly wheel
86/87computer (not modified)
co2 intercooler kit with bottle
mass air translator with 3" mass air
9 " k&n air filter
scan master
turbo saver
bare stock intake
stock upper dog house with stock t-body
sx fuel pump and filter
turbonetics waste gate
stock headers
bfr transmissinwith shift kit and centry trans brake
3200 atr carr billet half convetor
OTHER PARTS INCLUDED
another 109 block standard
stock heads
delco coil pac
gm mass air
cam sencer with gear drive
and what ever eles i round up
EVERYTHING LISTED ABOVE 7000.00
