Clean Out Sale (NOS,race,show,used) new and consolidated list

[pitch black]

Weekend bump

 

[usetaboost]

wheel well moulding set-

Looking for a dent free drivers rear. Let me know what you have

how about the wheel moulding set? Interested in the driver's rear pending condition, possibly whole set depending on condition of other three.

 

[G-bodyguy]

the 2 gauge a-pillar.. what size gauges does it hold and how much is shipping for it to Ohio, and is it the one pictured

 

[G-bodyguy]

disregard last post!

 

[Rauder]

Interested in the Chrome water pump pulley $35

 

[lmc0002]

matts 87 we4

do you still have the shifter handle? will send check in am, let me know, thanks Matt 508 -574-6210

 

[pitch black]

New list of sold items. Also found a few other things I will list shortly. Thanks

NOS Turbo oil drain back tube $85
NOS Casper Heated O2 (sensor only) $40
NOS Casper High current Injector harness (nos) $100
NOS MAF $550
NOS wastegate selenoids x2 $90 each
NOS 2 gauge apillar pod $25
NOS 1 gauge apillar pod $20
NOS CCCI deadend for XFI distributor conversion $75
NOS shifter handle $35 SOLD
NOS a/c delete pulley $40
NOS cam sensors x2 $280each
NOS billet specialties center caps
NOS kirban alternator fan upgrade $35 SOLD



8 position Max effort for 36lb inj $150
15 position switch $40
Casper Volt booster (used, needs two electrical connectors crimped on) $30
3.5" delphi 5pin LS2 maf Used $90
200 4R detent $20
Kenne Bell console switch plate x2 $30each SOLD
Suntech 2 5/8" vacuum/boost gauge $15
Autometer 3 1/4" Tach $25 SOLD
Autometer 2 5/8 mech trans temp gauge $20 SOLD
Equus 2 1/8" elec oil press gauge $20
Custom oil pickup $40
Fuel rail t's used to tee off front of stock fuel rail $10each have 5
Egt meter kit $100
NG3 fuel boost pump/theft deterrent $45
Wheel well mldg set used( this set had a few small dents) $85
Black crinkle maf pipe steel $25
Radio surround $20
GN side impact strips (missing on end) $50
Center section GN spoiler $90
HKS wastgate $165
Black gloss powder coated stock valve covers $75
Black crinkle powder coated stock valve covers $75
Chrome stock valve covers $130
Full A pillar gauge pod with autometer boost/vaccum and casper knock gauges $125
Gn center caps driver quality (all 4) $45 SOLD
Gn center caps (only 3 and one is missing logo) $25 SOLD
Polished turbo inlet bell (stock style) $35
Polished turbo inlet bell ( aftermarket style) $45
Intercooler fan $40
Chrome rear diff cover $55
Chrome water pump pulley $35 SOLD
Chrome hood spring $15
Chrome coil pack bracket $35 (has small flake)
Chrome Kit (coil bracket,hood spring,PS pump bracket, Under hood braces, lower alt bracket,cruise control,bracket,plus more) $185
Injector harness $40
Chinese ATR headers (missing hardware) $140
MAF hose $15
Race crank hub $95
Hard vacuum lines that run under the throttle body $25




As always all plus shipping, May take offers on some, and Sorry NO PAYPAL.
Let me know what you need PICS of or info on. Thanks Lyle

 

[dr_frankenstein]

Chinese ATR headers (missing hardware) $140

Race crank hub $95

would you do 110 on the headers?

and can I see a pic of this hub?

A.j.

 

[pitch black]

Pic of the hub and let me get back to on the headers

 

[turbobooster]

Can u post up a pic of the full A pillar gauge pod with the boost and knock gauge thanx

 

[bpman1234]

hi. on those vacumlines that run under the tb do i get the ones tha go to the pvc also ? please reply thanks

 

[jdhogg1]

Hows the rear passenger wheel well moulding? If you still have it

 

[PHANTASM]

Still have the headers? Will they be the same as the stock ones for fit and working with all the stock stuff?

 

[GNTtypeKid]

2nd in line for headers. Paypal ready if they are stock direct bolt on.

 

[Michael McCoy]

Cool...this thread's almost a year old

 

[in the elevens]

Stii have the radio at $20?
If so please email me a photo to djricardos@aol.com is it a am/fm cassette? and does it work? thanks