6 6-b-kwik getting back in it Joined Oct 21, 2001 Jul 28, 2011 #1 getting codes 42 and 51 on scanmaster any clues were to start.....car will start and idle but not for long as soon as it goes into gear it dies..help
getting codes 42 and 51 on scanmaster any clues were to start.....car will start and idle but not for long as soon as it goes into gear it dies..help
8 86BLACKT Member Joined Nov 15, 2004 Jul 28, 2011 #2 When my EGR went bad my car wouldntrun unless wide open. Try taking vacuum line off and see if it makes a difference
When my EGR went bad my car wouldntrun unless wide open. Try taking vacuum line off and see if it makes a difference
T turb0buick57 Member Joined Oct 10, 2009 Jul 28, 2011 #3 Malfunction Codes Reference When mine threw code 51, it would start but wouldnt stay running. I swapped out the chip with a spare and it ran fine, no code. I tried adjusting the pins on the bad chip in the ecm a few times but the chip never would work right for me again.
Malfunction Codes Reference When mine threw code 51, it would start but wouldnt stay running. I swapped out the chip with a spare and it ran fine, no code. I tried adjusting the pins on the bad chip in the ecm a few times but the chip never would work right for me again.
6 6-b-kwik getting back in it Joined Oct 21, 2001 Jul 29, 2011 #4 i have a turbotweak chip that is only 3yrs old at best..wonder if that ha sto do with my top end problem as well car wont pull past 110
i have a turbotweak chip that is only 3yrs old at best..wonder if that ha sto do with my top end problem as well car wont pull past 110
6 6-b-kwik getting back in it Joined Oct 21, 2001 Jul 30, 2011 #5 so guess il start with new icm any ideas on brands and were to get?also gonna add ls1 maf and translator
so guess il start with new icm any ideas on brands and were to get?also gonna add ls1 maf and translator
6 6-b-kwik getting back in it Joined Oct 21, 2001 Aug 5, 2011 #6 gonna try tp look at this thing soon
