Cam belt drive
- Thread starter TurboTR
- Start date
HOT ROD-GN
Active Member
- Joined
- Jun 10, 2009
Call R.P.E.
- Joined
- Jun 18, 2001
Hey Tod,
Putting one on now. The Danny Bee is a pretty trick piece. Pretty straight forward installation. Obviously, it uses a danny bee cam retention and un cut cam nose. I got a custom made front mount distributor from Mike Booher along with a Peterson single stage belt drive pump. Distributor is a VERY nice piece, and he makes them himself. I just dropped the whole mess off at my machinist to make an oil pump bracket and spacers to get everything to line up correctly. Weaver Bros has crank drive mandrels that fit the BHJ balancer and they are cheaper than Jones. I got a radiator mount Mezier water pump.
FYI I'll be in your neck of the woods 4/07-4/11 for a wedding.
Putting one on now. The Danny Bee is a pretty trick piece. Pretty straight forward installation. Obviously, it uses a danny bee cam retention and un cut cam nose. I got a custom made front mount distributor from Mike Booher along with a Peterson single stage belt drive pump. Distributor is a VERY nice piece, and he makes them himself. I just dropped the whole mess off at my machinist to make an oil pump bracket and spacers to get everything to line up correctly. Weaver Bros has crank drive mandrels that fit the BHJ balancer and they are cheaper than Jones. I got a radiator mount Mezier water pump.
FYI I'll be in your neck of the woods 4/07-4/11 for a wedding.
