Cam and crank sensor wiring

[TommyJ]

I am using a turbo Buick crank and cam sensor on a 3.8 n/a engine with a Haltech ecm running the whole thing. What are the ground, sensor output, and 12v colored wire? I bought the wiring from Caspers and have (of course) lost the schematic they sent with them.

Colors for the crank sensor are grey/red stripe, black, green. I am assuming black is ground.

The cam sensor has red, green, and black.

Seems that the green is 12v, the black is ground, and the sensor output is the other.

Could someone confirm this is correct or not? I searched and...well, here I am!

Thanks,

-Tom

 

[Just a Six??]

Ask John at Caspers. He is Very Helpful!! Nice Guy to deal with.
You can also PM him He goes by GNVenom I believe.

 

[TommyJ]

Thanks, "Just a six??"

John at Casper's confirmed the wiring and it is posted, below, for others to research if anyone needs this data.

Cam sensor:
Red - 12V
Green - Signal
Black - Ground

Crank Sensor for 87
Grey/Red stripe - signal
Green - 12V
Black - Ground.

-Tom