burnt coil! need some help

[1quickfrc]

i finally got the gn out and it had a skip the number 1 and 4 coil pack wasnt working i tested it no resistance so i put a new one on from advance and start it up go to pull out of my driveway and smoke starts pouring out from under the hood ... the number 3 side of the coil decided to burn up

so does anyone have any advice on why this might have happened i need help!

 

[azbob]

Verify that you did not ground the connector to the ignition module. These have to be bent down to prevent contact.

 

[1quickfrc]

i bent them inwards and as soon as the coil cools down i will pull it off and see if that was the prob.

and is there a difference between a regular 3.8 coil and the turbos coil?

 

[1quickfrc]

everything looked ok under the coil besides the modules sticky glue mess

 

[87granny]

If the module is a sticky mess and it's oooosing stuff out more than likely the module if fubar