Bullet Racing Cam & Crower Lifters

[Kibster]

Barely used Hyd. Bullet Racing Cam & Crower Lifters for 86/87 Buick GN (or others).

Used for less than 2 hours of actual run time (swapped to a milder GSCA club cam) on a fresh Precision Engine & Machine rebuilt engine.

Have Cam Card...

Cam Lobe Seperation = 110

Intake Duration @ .050" = 214
Exhaust Duration @ .050" = 210

Intake Lobe Lift = .306 (.306 x 1.55 = .474 actual)
Exhaust Lobe Lift = .294 (.294 x 1.55 = .455 actual)

Plus Crower Cam Saver Lifters (boxed in order & labeled)

Cam & Lifters - $120.00 plus actual shipping

Please email questions to rcfan@comcast.net or call cell (815) 543-2771

 

[Kibster]

Pictures...

Ready to ship!

 

[Kibster]

Valve Springs

I also have the corresponding valve springs...again only 2 hours of run time!

Buy it this weekend (9/19 & 9/20) and I'll throw them in at no additional cost...

 

[nu2gn]

what kind of turbo and torque converter were u using with this combo, and injector size?

 

[Kibster]

Stock turbo, 36# injectors & stock converter.

This cam was ordered with the idea that I'd upgrade the turbo to a TA-49 or GT-3255 and a bit looser converter (say an Orange Stripe or equiv).

Basically - I'm happy with the car as is (easy mid-12's @107 MPH on pump gas w/one of Razor's alky kits).

Trying to raise $'s for another project...

 

[Kibster]

Just FYI...

The Bullet cam cost $159.00 new, the Crower lifters were $96.00 and the springs were another $46.00...

So around $300 worth of like new parts for just $120.00 - I must be insane!

Seriously - I'd like to get these items out of the way. Don't make me E-Bay them!

KM

 

[nu2gn]

weren't u offering corresponding springs with the 120?

 

[Kibster]

Now on eBay!

Ah...no...in the original post I only had the cam & lifters...

Forgot about the springs - even though they were in a clear bag right in the same storage tote with the lifters. Duh...

Anywho...

Now on eBay (search for item # 170387052029)

 

[Kibster]

Sold

Sold via eBay....