Billet Crank, Distributer setup and other upgrade parts.

[V6 Beast]

Kings Billet crank. 3.54 stroke. Setup for SBC rods. In good shape. May need a light polish. Over $2500 invested. $1500 + shipping. http://v6racing.com/forsale/cranksm.jpg http://v6racing.com/forsale/crank2sm.jpg http://v6racing.com/forsale/crank3sm.jpg

MSD Billet distributer setup for Turbo Buick. Includes: MSD Billet Distributer with spare cap/rotor, Crane Fireball HI-6 DSR Ignition with 2 stage rev limiter, Crane Fireball LX92 Coil, and MSD custom plug wires and electrical harness deadend from Hartline. $800 shipped. http://v6racing.com/forsale/distributor.jpg http://v6racing.com/forsale/hi6.jpg http://v6racing.com/forsale/dis6end.jpg http://v6racing.com/forsale/lx92.jpg

Aeromotive Eliminator Fuel Pump in excellent working order. I believe the filter in pic needs a replacement screen but is included. $300 shipped in lower 48. http://v6racing.com/forsale/eliminator.jpg

Powermaster XS Volt 200 Amp Alternator. Adjustable from 12-16 volts. Like new. $275 shipped in lower 48. http://v6racing.com/forsale/powermaster.jpg

RJC underdrive race pulley in v.good shape. $75 shipped. http://v6racing.com/forsale/pulley.jpg

Hi-torque mini Starter. This is not the one that has the nylon gear that will break. This is the one you want for a race motor. Looks dirty in pic but works great. I didn't have time to clean it up. $150 shipped. http://v6racing.com/forsale/starter.jpg

Crower Solid Roller Lifters in v.good shape. $200 shipped. http://v6racing.com/forsale/lifters.jpg

 

[jmendlik]

can you send me pics of starter and alteranator?? link does not work..

staged2@sbcglobal.net

 

[V6 Beast]

can you send me pics of starter and alteranator?? link does not work..

staged2@sbcglobal.net

Sorry link fixed.

 

[forcefed3.8's]

Got a pic of the lifters?

 

[V6 Beast]

Got a pic of the lifters?

I can take one in the AM.

 

[TRICKSIXPA]

I'll take the race pulley is it the same diameter as a stock crank pulley?

 

[V6 Beast]

I'll take the race pulley is it the same diameter as a stock crank pulley?

no. Its an under drive pulley. It is a bit smaller.

 

[TRICKSIXPA]

Do you know by how much. I'm running a champion Ps Alt bracket.

 

[V6 Beast]

Do you know by how much. I'm running a champion Ps Alt bracket.

I really don't. I was running champion alt relocation bracket and had no trouble finding a belt for it. From Napa.

 

[TRICKSIXPA]

I guess do me a favor can you measure the diameter of the pulley I'm sure it's not much of a differance.
It will bolt up to a stock balancer correct?

 

[V6 Beast]

It is quite a bit smaller. It will bolt to a stock balancer. http://rjcracing.com/product/pulleys/pulley-underdrive/

 

[TRICKSIXPA]

I'll pass I see its used for those running electric water pumps!

 

[V6 Beast]

I'll pass I see its used for those running electric water pumps!

It will work with stock water pump too.. just going to spin it a bit slower. I used a little different RPM range than stock

 

[spooledyou]

How many runs on the crank

 

[spooledyou]

What was the rpm rang also ?

 

[V6 Beast]

about 15-20 passes. 5000-7500 RPM. Motor was running perfect when it was pulled out.

 

[spooledyou]

It was running perfect why take it apart ?do you have any other Parts from the motor

 

[V6 Beast]

I have a different motor with GN1R heads to put in. I sold most of the rest of the motor parts a while back. Pistons, rods, rockers, heads, intake, block all sold a couple months ago.

 

[9SECV6]

Bump for a good guy.. how are you doing steve ? Your dad get that blue car on the road yet ??

Posted from the TurboBuick.Com mobile app

 

[turbot990]

Still have the dist set up.