ATR Double Pumper Instructions?

[djj624]

Can anyone give me some insight on wiring this up, i bought it used off of a member and he didnt have the directions. My questions are with the connections up front. I have the hobs switch that obviously gets a vaccum source (wheres the best place)? It already has its wires screwed to it. I have a thicker black cable with a thin whiter wire next to it im guessing the black one is constant power and white is key on? Then there is another black one im guessing thats a ground, that wire is near the relay? Then another 2 wires red and black thin ones coming out of another loom im guessing again here but i think its for the led?

 

[G NASTY]

My Hobbs switch that came with my ReD DP only has a black connection that go to the back of the car to the pump and what looks like a power source. I'm not Sure what vaccum line to use so I havnt hooked mine up yet.

 

[djj624]

Anyone have any schematics
From an older atr setup?

Sent from my Droid using Tapatalk

 

[Jack Kotlarz]

I have directions. Can you pm me a fax number?

 

[Just a Six??]

If like the Racetronix then basically any vac line is fine. I use the one to my boost guage.

 

[djj624]

Hey Jack. I just pmed you a fax number. A buddy of mine is going to bring it to me later.

Let me know if you got the number.