Curious if anyone has ever been here and any stories they want to share.
There is not much room for a fuel sump on our cars given location of the muffler and was wondering if anyone has done this on the TTA tank with the plastic baffling. I can see the baffling making a huge mesh when welding in the sump.
Any other ideas on being able to hook up a external fuel pump and pickup location would be helpful.
What do you think on putting a bulkhead fitting at lowest point of the stock tank and using this as the feed point for an external pump.
Thoughts.
There is not much room for a fuel sump on our cars given location of the muffler and was wondering if anyone has done this on the TTA tank with the plastic baffling. I can see the baffling making a huge mesh when welding in the sump.
Any other ideas on being able to hook up a external fuel pump and pickup location would be helpful.
What do you think on putting a bulkhead fitting at lowest point of the stock tank and using this as the feed point for an external pump.
Thoughts.