Any update for PL to read over 3 bar?

[trashmechlv]

Any way to get an update to log over 30psi boost On PL? Thanks

 

[TurboBob]

what MAP sensor are you using?

Bob

 

[pacecarta]

Any way to get an update to log over 30psi boost On PL? Thanks

you mean besides going into PL and selecting the F3 tab "config and download " andthen selecting from the list under "map sensor type " which has 3bar/ 2bar/ 3.5 bar and 5 bar that you could select?

but first you need a sensor thats capable of reading over 3bar

 

[trashmechlv]

I have GM style 3 bar but it crapped out. Was curious since I need a new one and Im over 30psi now.

 

[trashmechlv]

you mean besides going into PL and selecting the F3 tab "config and download " andthen selecting from the list under "map sensor type " which has 3bar/ 2bar/ 3.5 bar and 5 bar that you could select?

I didnt realize their was options for higher than 3 bar. Thanks I will look into that.

 

[trashmechlv]

Ok I see it now. Sorry for the rookie question. So is their any 3.5 or 5 bar MAP sensor that work best with PL or will any sensor work?

 

[TurboBob]

AEM sensors are what the PL was set up for, there may be others with the same scaling though.

Bob

 

[trashmechlv]

AEM sensors are what the PL was set up for, there may be others with the same scaling though.

Bob

Thank you Bob.