Maybe someone can resolve this issue. The harness was wired up correctly but the only issue is with the wideband 02. The A/F ratio stays pegged at 9.19 and does not move at all either on the dashboard or in the datalogging page. Also on the VE page there is no 02 correction for each cell, which would probabally indicate that the 02 is inop. The box and wideband 02 are two days old. Here's some voltage numbers from the wideband with the ignition on.
UEGOS- 3.86
UEGOR- 2.59
UEGOV- .08
With the wideband unplugged
UEGOS 3.88
UEGOR- 4.98
UEGOV- .08 (no change)
-John
UEGOS- 3.86
UEGOR- 2.59
UEGOV- .08
With the wideband unplugged
UEGOS 3.88
UEGOR- 4.98
UEGOV- .08 (no change)
-John