9" rear-350turbo-350shortblock-283sb

[POWEREDbyCHEVY]

-9 inch rearend. 4.10 gear. 58" g body width,complete drum/drum $350----350 turbo trans no converter chevy bolt pattern from 4x4 $200----350 small block chevy 3970010 4 bolt main stand bore needs rebuilt $300----283 small block chevy low miles on rebuild, sb $200 ....... or trade up for 8.5 posi rearend

 

[POWEREDbyCHEVY]

#423-929-2166

 

[micknick1]

-9 inch rearend. 4.10 gear. 58" g body width,complete drum/drum $350

Would you ship? About how far from Virgina Beach are you???? Mike

 

[POWEREDbyCHEVY]

could meet half way or so...too much to ship

 

[POWEREDbyCHEVY]

im near bristol

 

[micknick1]

PMed you

Sent you a PM Mike

 

[POWEREDbyCHEVY]

if someone wants the 350 and the 283 i will take $450 for both. And with those come a quadrajet carb all the brackets and mounts and pulleys. waterpump, alt, starter, oil pan, timing chain cover, valve covers, everything i have. i think i have a distributor and air filter to. trades are welcome on a 8.5 rearend or a nice carb or NOS system maybe other small stuff let me know what you have.

 

[POWEREDbyCHEVY]

9 inch is 28 spline,open carrier,ready for a spool or a posi, it has no mounts everything cut off ready to be welded, its a 5 lug ford so to use chevy wheels the axles and drums need drilled, its the factory width 58" g body so you dont have to cut the housing or axles if you want the factory width.

 

[malibuick231]

What part of TN I grew up in Kingsport.

 

[POWEREDbyCHEVY]

i will also trade for a 12 bolt posi with a 3.23-3.55 gear. im not far from kpt.

 

[POWEREDbyCHEVY]

bump

 

[POWEREDbyCHEVY]

ttt

 

[POWEREDbyCHEVY]

trades?

 

[POWEREDbyCHEVY]

taking reasonable offers

 

[POWEREDbyCHEVY]

ttt

 

[POWEREDbyCHEVY]

ttt

 

[POWEREDbyCHEVY]

good stuff no room make an offer

 

[POWEREDbyCHEVY]

ttt

 

[POWEREDbyCHEVY]

ttt

 

[POWEREDbyCHEVY]

i also would be willing to put some boot in if someone has a 8.5 rearend they dont need.