oldprotrac
Spoolin Fool
- Joined
- Oct 6, 2006
Really looking to get a boat. heres the car info
T-Tops
New front bumper fillers
Motor has 10,000 or so miles
Stock block/crank/rods
206 Cam, comp
Keith black pistons
Big valve ported irons
PTE63 turbo
Adjustable Fuel pressure regulator
009 Injectors
Walbro 340 with rewire kit
3" Downpipe into dual 2.5" flowmasters
Cold air 3" intake
Tranny has been rebuilt im assuming around 10,000 miles also, has big aftermarket cooler
Shifts great with a Vigilante converter, not sure on stall, maybe 3400? It is a lockup.
Brand new fbody aluminum radiator
R-134A converted. Very cold
Boost and Fuel pressure gauges
Alternator 3 months ago
MOSER Axles
Scanmaster 2.1
Commander Chip
SS headers
new carpet
new window dew strips
Spal dual electric fans and caspers wiring kit
275/60/15 on rear almost new
245ish on front with 50% tread
500$ Coolingmist Alchy kit. Car runs great with 0 knock@22-23 psi with 20degrees timing.
The bad:
-Messed up the bumper and crinkled the passenger side quarter about 1/2" inward. It needs to be pulled back out. Was quoted 800 for labor to do this.
-Driver seat is broken from the accident, the track underneath is bent.
-Windshield has small crack in front of driver seat.
-NEEDS PAINT
-Leaks a little oil from the back of the pan.
-Passenger window goes up slowly
-turbo going I think.
T-Tops
New front bumper fillers
Motor has 10,000 or so miles
Stock block/crank/rods
206 Cam, comp
Keith black pistons
Big valve ported irons
PTE63 turbo
Adjustable Fuel pressure regulator
009 Injectors
Walbro 340 with rewire kit
3" Downpipe into dual 2.5" flowmasters
Cold air 3" intake
Tranny has been rebuilt im assuming around 10,000 miles also, has big aftermarket cooler
Shifts great with a Vigilante converter, not sure on stall, maybe 3400? It is a lockup.
Brand new fbody aluminum radiator
R-134A converted. Very cold
Boost and Fuel pressure gauges
Alternator 3 months ago
MOSER Axles
Scanmaster 2.1
Commander Chip
SS headers
new carpet
new window dew strips
Spal dual electric fans and caspers wiring kit
275/60/15 on rear almost new
245ish on front with 50% tread
500$ Coolingmist Alchy kit. Car runs great with 0 knock@22-23 psi with 20degrees timing.
The bad:
-Messed up the bumper and crinkled the passenger side quarter about 1/2" inward. It needs to be pulled back out. Was quoted 800 for labor to do this.
-Driver seat is broken from the accident, the track underneath is bent.
-Windshield has small crack in front of driver seat.
-NEEDS PAINT
-Leaks a little oil from the back of the pan.
-Passenger window goes up slowly
-turbo going I think.