wh1-Denver
New Member
- Joined
- Aug 15, 2002
86 WH-1 Designer
Original paint, interior and differential.
103k on car
Everything else was upgraded with performance parts:
Rebuilt Motor with less than 4k on it
.030 over JE pistons with total seal rings
Weber 206 roller cam new Comp Cams roller lifters
T&D roller rockers
Weber ported and polished heads
Weber ported and polished intake
Steel main caps
70mm Accufab Throtttle body and plenum
RJC plenum race plate
Precision Front Mount
HKS Blow off Valve
AlkyControl progressive kit
TE-45a
72s
ATR Headers, ATR 3” Down Pipe, ATR test pipe, ATR 2.5 duals (all stainless steel)
Built 200R4 With all billet internal PTSExtreme parts
PTS Billet 911 3500 stall
New poly body to frame mounts
HR Parts rear sway bar
HR parts adj upper control arms
HR Parts lower control arms
New Mickey Thompson Drag Radials 275/60
Centerline Telestars
This car is great on the street it hooks to the pavement very well, I drive it only on nice days for fun and to go the car shows / gatherings, and of course to hunt down some poor soul that doesn’t know it is a low 11sec car.
Car is located 45 min north of Tampa. I can and will email as many picts as necessary for serious buyers. You can also contact some of the Local Tampa Buick Boys that know me and my car so they can tell you that I am a straight shooter and take care of my toys.
I just sold an 87 GN Hard Top on this board to a guy in Texas site unseen and he was tickled pink at the shape the car was in when he got it delivered.
No tire kickers or low ballers please!
$16,000 obo
Original paint, interior and differential.
103k on car
Everything else was upgraded with performance parts:
Rebuilt Motor with less than 4k on it
.030 over JE pistons with total seal rings
Weber 206 roller cam new Comp Cams roller lifters
T&D roller rockers
Weber ported and polished heads
Weber ported and polished intake
Steel main caps
70mm Accufab Throtttle body and plenum
RJC plenum race plate
Precision Front Mount
HKS Blow off Valve
AlkyControl progressive kit
TE-45a
72s
ATR Headers, ATR 3” Down Pipe, ATR test pipe, ATR 2.5 duals (all stainless steel)
Built 200R4 With all billet internal PTSExtreme parts
PTS Billet 911 3500 stall
New poly body to frame mounts
HR Parts rear sway bar
HR parts adj upper control arms
HR Parts lower control arms
New Mickey Thompson Drag Radials 275/60
Centerline Telestars
This car is great on the street it hooks to the pavement very well, I drive it only on nice days for fun and to go the car shows / gatherings, and of course to hunt down some poor soul that doesn’t know it is a low 11sec car.
Car is located 45 min north of Tampa. I can and will email as many picts as necessary for serious buyers. You can also contact some of the Local Tampa Buick Boys that know me and my car so they can tell you that I am a straight shooter and take care of my toys.
I just sold an 87 GN Hard Top on this board to a guy in Texas site unseen and he was tickled pink at the shape the car was in when he got it delivered.
No tire kickers or low ballers please!
$16,000 obo