83 T Type CE Light came loose!

[FtCampbellBusa]

Anyone know where this wire connects to coming off the bulb? I removed the dash and now my light does not work. I noticed I have a bulb with pink/blk and yellow wire. The yellow wire came disconnect and I have no idea where to connect it back to. Will this effect my scanmaster? Will I still get the MAL code?

 

[Topjimmy]

Check the ALDL connector under the dash. I don't have a wiring diagram for the `83 but your loose wire could be from the B terminal.

The ALDL connector looks like this:



Here's some more information on the service light and trouble codes for early GM computer cars:

Buick Trouble Codes or Buick Service Engine Soon Codes at TriShield.com The Buick Enthusiast Network



Good luck, Jimmy

 

[FtCampbellBusa]

Appreciate it! It ended up being the third port from the left as looking at the photo. Mine was a yellow wire on the port too. Previous owner must have pushed the bare yellow wire into the yellow wire port. Everything working again. I ended up re-wiring everything since it looked like a cluster bomb went off under my dash. Thanks again!

 

[Topjimmy]

:smile: