-6 A/N Lines

[psycho6cyl]

Has anyone ran -6 lines from trans to a cooler ran like the old trans cooler lines - in vicinity of engine/pan etc? Pics would be great if possible. Thx

 

[Chrisk]

Cooler is mounted behind the front plate. B&M with a fan I have the fan on a switch.


Sent from my iPhone 5 using Tapatalk Pro

 

[psycho6cyl]

Cooler is mounted behind the front plate. B&M with a fan I have the fan on a switch.


Sent from my iPhone 5 using Tapatalk Pro

You are the man. Thanks so much..

 

[psycho6cyl]

Those are 90s off the trans?

 

[Chrisk]

45s


Sent from my iPhone 5 using Tapatalk Pro

 

[Chrisk]

You also need 2 fittings that go in the Trans and have -an on the other end.


Sent from my iPhone 5 using Tapatalk Pro

 

[aminga]

fwiw take some 45's turned toward the back of the car and you can run it up the frame rails through the spring pocket and avoid having to run it through the crossover in case it has to come out again

 

[psycho6cyl]

I wanted to do that but was concerned about heat from down pipe and taking away any cooling affects. Just ultra paranoid running a nl and spragless and how much heat they generate

 

[aminga]

I wanted to do that but was concerned about heat from down pipe and taking away any cooling affects. Just ultra paranoid running a nl and spragless and how much heat they generate

I used straight fittings on mine so it runs close to the DP. A 45 angled back would send the lines further back and away from the DP.

 

[psycho6cyl]

Ok thx. Do you have a temp guage on it by chance?

 

[aminga]

Ok thx. Do you have a temp guage on it by chance?

Nope