50# Injectors + Rail + Wiring, Lower Intake, Accufab 65mm TB, Plenum, Cam + More!

Rear main seal and cam button - Both New

$15 shipped...


ill take this.

pm me with payment instructions
 
turbo tweak chip for 50#

hey john, i'll take the turbo tweak chip for 50# inj. will send paypal for 25$
 
Thursday Morning Price Drop and Update (combined a couple items)...

O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27)

$40 shipped...

Probe Forged Pistons, Rings and Rods with Rod and Main Bearings (Pic in post #23)

Now $290 shipped...


1987 Service Manuals complete set in two binders (Pic in post #21)

Now $140 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$75 shipped...

Stock Turbo Cover (Pic in post #28)

$20 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$200 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$75 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $30 shipped...

-------------------------------------------------

PENDING PAYMENT...

Casper's Electronics Cam Sensor Cap - New: Pending...
Billet water neck with new 160 degree thermostat: Pending...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip

-------------------------------------------------
 
Friday Morning Price Drop and Update (combined a couple items)...

O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28)

$50 shipped...

Probe Forged Pistons, Rings and Rods with Rod and Main Bearings (Pic in post #23)

Now $290 shipped...

1987 Service Manuals complete set in two binders (Pic in post #21)

Now $140 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$70 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$185 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$70 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $30 shipped...

-------------------------------------------------

PENDING PAYMENT...

Casper's Electronics Cam Sensor Cap - New: Pending...
Billet water neck with new 160 degree thermostat: Pending...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip

-------------------------------------------------
 
Saturday Morning Price Drop and Update...

(You get all of this) - O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28)

$45 shipped...

Probe Forged Pistons, Rings and Rods with Rod and Main Bearings (Pic in post #23)

Now $275 shipped...

1987 Service Manuals complete set in two binders (Pic in post #21)

Now $135 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$60 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$175 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$65 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $25 shipped...

-------------------------------------------------

PENDING PAYMENT...

Casper's Electronics Cam Sensor Cap - New: Pending...
Billet water neck with new 160 degree thermostat: Pending...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip

-------------------------------------------------
 
Sunday Update...

(You get all of this) - O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28)

$45 shipped...

1987 Service repair shop Manuals, complete set in two binders (Pic in post #21)

Now $135 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$55 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$170 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$65 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $25 shipped...

-------------------------------------------------

PENDING PAYMENT...

Casper's Electronics Cam Sensor Cap - New: Pending...
Billet water neck with new 160 degree thermostat: Pending...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip
Probe Forged Pistons, Rings and Rods with Rod and Main Bearings

-------------------------------------------------
 
Monday Update...

(You get all of this) - O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28)

$40 shipped...

1987 Service repair shop Manuals, complete set in two binders (Pic in post #21)

Now $130 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$50 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$165 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$65 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $25 shipped...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip
Probe Forged Pistons, Rings and Rods with Rod and Main Bearings
Casper's Electronics Cam Sensor Cap - New
Billet water neck with new 160 degree thermostat

-------------------------------------------------

New Listing...

16 Sealed Power HT-969 Lifters for Buick 350/455

$35 shipped...

Lifters.jpg


Good working alternator off of 87 T

$45 shipped...

Altern.jpg


2 Sets of gaskets for the V6, New

$35 shipped...

Gaskets.jpg


RH front turn lens

$20 shipped...

Turnlens.jpg
 
17 fittings - I paid $205 + shipping for all of these.

You can have them all for $150 shipped...


I don't want to sell these individually so the buyer of these is going to get a great deal. They are all new...

First row on left... (the prices are what I paid)
(1) 660841 - Endura Elbow, 90 x -6 Flare x 3/8 NPT $13
(2) 660481 - Endura Adapter, -8 Flare x 3/8 NPT $6 each ($12)
(1) 641311 - Endura 7/16 x 24 -3 Male Brake Fitting $12

Next row over...
(2) 660461 - Endura Adapter, -6 Flare x 3/8 NPT $6 each ($12)
(3) 660841 - Endura Elbow, 90 x -6 Flare x 3/8 NPT $13 each ($39)

Next Row...
(3) 613161 - Endura Full Flow 90, Swivel -6 $22 each ($66)
(1) 610031 - Endura Hose End, -8 Straight $10

Last Row...
Summit SUM-220846 -8 Flare to 3/8 NPT $3
Summit SUM-G1487B 3/8 NPT Plugs $8
(2) Summit SUM-220887 90 Degree, -8 AN Hose to Female -8 AN $15 each ($30)

Fittings.jpg


Fittings1.jpg
 
New Perma-Cool 184 Sandwich Oil Adapter $30 shipped for both...

# Perma-Cool® sandwich adapters are installed between the oil filter landing on the engine block and the oil filter to route the oil to a remote oil cooler.
# They are die cast from aerospace quality aluminum. O-rings and illustrated multilingual instructions included. Brass fittings and AN fittings sold separately

13/16"-16 Threads

Designed to fit most early GM 4 and 6 cylinders and Cadillac, Oldsmobile and Pontiac V8's

without recessed filter landing.

1" thick. 3/8" FPT ports for use with 1/2" oil lines. 2-1/2" and 3-1/8" O-rings included.

Perma.jpg
 
Cruise control wiper switches, napa number 735-2777

$25 shipped...

Is that $25 shipped for both???
 
Tuesday Update...

(You get all of this) - O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28)

$35 shipped...

1987 Service repair shop Manuals, complete set in two binders (Pic in post #21)

Now $125 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$45 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$160 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$65 shipped...


16 Sealed Power HT-969 Lifters for Buick 350/455 (Pic in post #48)

$30 shipped...


Good working alternator off of 87 T (Pic in post #48)

$40 shipped...


2 Sets of gaskets for the V6, New (Pic in post #48)

$30 shipped...


RH front turn lens (Pic in post #48)

$20 shipped...

17 Russell and Summit fittings (Pic in post #49)

$135 shipped...


Cruise control wiper switch (Pic in post #50) One left...

$25 shipped...


Two Perma-Cool 184 Sandwich Oil Adapters (Pic in post #51)

$25 shipped...



Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $25 shipped...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip
Probe Forged Pistons, Rings and Rods with Rod and Main Bearings
Casper's Electronics Cam Sensor Cap - New
Billet water neck with new 160 degree thermostat

-------------------------------------------------
 
A must have for any turbo car...

Column lock. This steel casing goes around the steering column to prevent the car from being started or shifted into neutral. Comes with one key.

$80 shipped...

Collock.jpg
 
Wednesday Update and price drop on some...

(You get all of this) - O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28)

$35 shipped...

1987 Service repair shop Manuals, complete set in two binders (Pic in post #21)

Now $125 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$40 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$160 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$65 shipped...

16 Sealed Power HT-969 Lifters for Buick 350/455 (Pic in post #48)

$30 shipped...

Good working alternator off of 87 T (Pic in post #48)

$35 shipped...

2 Sets of gaskets for the V6, New (Pic in post #48)

$30 shipped...

RH front turn lens (Pic in post #48)

$18 shipped...

17 Russell and Summit fittings (Pic in post #49)

$130 shipped...

Cruise control wiper switch (Pic in post #50) One left...

$25 shipped...


Two Perma-Cool 184 Sandwich Oil Adapters (Pic in post #51)

$25 shipped...

Column Lock (Pic in post #55)

$75 shipped...

ARP 350 head studs - new (Pic in post #56)

$75 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $25 shipped...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip
Probe Forged Pistons, Rings and Rods with Rod and Main Bearings
Casper's Electronics Cam Sensor Cap - New
Billet water neck with new 160 degree thermostat

-------------------------------------------------
 
Thursday Update and price drop on some...

(You get all of this) - O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28), RH front turn lens (Pic in post #48)

$45 shipped...

1987 Service repair shop Manuals, complete set in two binders (Pic in post #21)

Now $120 Shipped...

87 stock MAF - Mass Air Flow sensor (Pic in post #26)

$35 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$155 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$60 shipped...

16 Sealed Power HT-969 Lifters for Buick 350/455 (Pic in post #48)

$25 shipped...

Good working alternator off of 87 T (Pic in post #48)

$35 shipped...

2 Sets of gaskets for the V6, New (Pic in post #48)

$25 shipped...

17 Russell and Summit fittings (Pic in post #49)

$100 shipped...

Cruise control wiper switch (Pic in post #50) One left...

$20 shipped...

Two Perma-Cool 184 Sandwich Oil Adapters (Pic in post #51)

$20 shipped...

Column Lock (Pic in post #55)

$70 shipped...

ARP 350 head studs - new (Pic in post #56)

$75 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $20 shipped...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip
Probe Forged Pistons, Rings and Rods with Rod and Main Bearings
Casper's Electronics Cam Sensor Cap - New
Billet water neck with new 160 degree thermostat

-------------------------------------------------
 
Friday Update and price drop on some...

(You get all of this) - O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), Stock plenum (power plate is sold) (Pic in post #27), Stock Turbo Cover (Pic in post #28), RH front turn lens (Pic in post #48)

$40 shipped...

87 stock MAF - Mass Air Flow sensor (Pic in post #26)

$30 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$155 shipped...

Two Super Turbo Mufflers (Pic in post #39)

$60 shipped...

16 Sealed Power HT-969 Lifters for Buick 350/455 (Pic in post #48)

$25 shipped...

Good working alternator off of 87 T (Pic in post #48)

$30 shipped...

2 Sets of gaskets for the V6, New (Pic in post #48)

$25 shipped...

17 Russell and Summit fittings (Pic in post #49)

$80 shipped...

Cruise control wiper switch (Pic in post #50) One left...

$20 shipped...


Two Perma-Cool 184 Sandwich Oil Adapters (Pic in post #51)

$20 shipped...


Column Lock (Pic in post #55)

$60 shipped...

ARP 350 head studs - new (Pic in post #56)

$75 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $20 shipped...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
rear main seal and cam button
Turbo Tweak chip
Probe Forged Pistons, Rings and Rods with Rod and Main Bearings
Casper's Electronics Cam Sensor Cap - New
Billet water neck with new 160 degree thermostat
1987 Service repair shop Manuals, complete set in two binders

-------------------------------------------------
 
Top