3" silicone elbows(powerstroke)

[TurboBuickSix]

http://www.hightempsilicone.com/product/HTS3004906BK

I was thinking of using this on the pass side to buy me some room by the battery tray and reduce the cutting on the inner fender.They also sell a 45 that could work on the driver side outlet too.Just not sure if it will be ok with 25 psi but I don't see why not.Anyone familiar with this company and their products quality?
__________________
Dave Schreiber,86 GN. 12.00@114
It's ready for another shovel full of money...

 

[broke1]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7950899725&category=33742

Hes a sponsor and thats about as cheap as ive seen em.Bweavy also sells his stuff.

Nick Micale's powerstoke is installed with silicone 45's.25#'s should be fine.

 

[Nick Micale]

This is the same type elbow we use when we mod the PS outlets. The outlets are cut off and welded on to point outboard.

Don't see how the elbow will work if this mod is not done?

 

[broke1]

Ill tell you how,section and reweld the outlets