3.8 motor parts

[blackisfast]

Update*****

Hello all. My buick is gone (long sob story) and this is what's left of my project. I would prefer to sell all as a bundle, but I might be persuaded to sell pieces off. Parts were at a machine shop, blasted and checked. The crank snout was junk so I scrapped it. Here's what I have.

87 3.8 block from a t-type with 54k on it. Was std, is now rough bored, was going to to .020 over

Heads from that engine, they are dissembled but complete

Heads off a different 87 engine. These have minor port work done, I may have the springs and valves but I don't think so

Aluminum valve covers

Aluminum timing cover

Oil pan and pick up ****sold pending funds****

6 stock rods from the engine with 54k

New in the box Oliver rods. Basically factory replacements but take a heck of a lot more rpms, boost and power. ******sold pending funds*****

$550 for all of it

I really, really don't want to ship this stuff. I have no clue how to go about shipping the block. Cash and a hand shake are preferred. I'm willing to drive 100 miles from tucson az if you want to meet up.

Thanks for looking, I hope it helps someone get their ride back on the road.

 

[TurboTJT]

Should you decide to part out i'll take the oil pan & Oliver rods (pending part number)

 

[blackisfast]

Should you decide to part out i'll take the oil pan & Oliver rods (pending part number)

Took a pic of the tag on the box, hope the part number is there. Shipping or pick up?

 

[marleyskater420]

You are in Tucson?

How much would you let the block, stock front cover, and mildly ported heads with valvesprings go for? I can arrange for a freight pickup, so don't worry about shipping.

Does the block come with the stock caps? Anything else?

Thank you,
Tyler

 

[TurboTJT]

Should you decide to part out i'll take the oil pan & Oliver rods (pending part number)

Took a pic of the tag on the box, hope the part number is there. Shipping or pick up?

Ok I'd like to buy the pan+pickup & Oliver rods.
Need to go with shipping to 76065.

Interested in the block as well but pickup is to far, unless your planning a trip to Texas.....

 

[blackisfast]

You are in Tucson?

How much would you let the block, stock front cover, and mildly ported heads with valvesprings go for? I can arrange for a freight pickup, so don't worry about shipping.

Does the block come with the stock caps? Anything else?

Thank you,
Tyler

Ok I'd like to buy the pan+pickup & Oliver rods.
Need to go with shipping to 76065.

Interested in the block as well but pickup is to far, unless your planning a trip to Texas.....

I would love to go to Texas actually, a good buddy transferred there, I just don't think my old truck would like that trek lol. I'll work out shipping in a bit and pm you with a total. On a side note, I forgot that my daughter robed the sticker from the oliver rods, other than that, they're complete and new.

 

[blackisfast]

You are in Tucson?

How much would you let the block, stock front cover, and mildly ported heads with valvesprings go for? I can arrange for a freight pickup, so don't worry about shipping.

Does the block come with the stock caps? Anything else?

Thank you,
Tyler

Let me look for the springs on the ported heads before I firm up a price. For my own knowledge, who ships like that? The block has stock caps and bolts only.

 

[marleyskater420]

Let me look for the springs on the ported heads before I firm up a price. For my own knowledge, who ships like that? The block has stock caps and bolts only.

I use a freight company that I found through my work. They are like brokers but for freight liners. You give them the size/dimensions/weight of what you are shipping, and they find you the cheapest possible price to ship it.

Typically it ends up costing about $.15 - $.35/lb depending on what it is. Engine blocks I think were like $80-100 if you can palletize it.

 

[blackisfast]

Pm's sent

 

[blackisfast]

Rods and pan are sold pending funds.

 

[limitedv6]

I will buy all of it and arrange shipping if no one that is ahead of me has if there is some of it sold i will buy the block by its self also. Thanks call or text 270-300-8046

 

[limitedv6]

Also have some friends that might be able to bring the parts to the nationals for me.

 

[blackisfast]

I will buy all of it and arrange shipping if no one that is ahead of me has if there is some of it sold i will buy the block by its self also. Thanks call or text 270-300-8046

Texted/replied

 

[TurboTGuy]

I will buy all of it and arrange shipping if no one that is ahead of me has if there is some of it sold i will buy the block by its self also. Thanks call or text 270-300-8046

If limited passes on the block I'm interested.

I'm in Phoenix.

 

[limitedv6]

I am working on getting the stuff picked up or shipped

 

[blackisfast]

If limited passes on the block I'm interested.

I'm in Phoenix.

I'll keep you posted, you're next in line sir. Thank you for your interest.

 

[blackisfast]

I am working on getting the stuff picked up or shipped

What's the good word? Any update?

 

[blackisfast]

All sold, thank you.