25 Year Parts Hoard, New and used parts June 2014 Update

[Intercooled88s]

Do you have a seat belt release for the drivers side (arm that sits in b pillar) if my wording is incorrect? Any a/c lines and condensors, my GN came with the a/c removed and I am thinking of putting a/c back in?

What's your zip code?

 

[skidlid]

I have the drivers release and I also have the AC lines. Do you need the lines that go to the AC compressor and the hard line that's all alum? And do you need it for 84/85 or 86/87. I don't have the condenser but that can be bought new.

I need all four lines, how much for all 5 items shipped to mn 56031

 

[skidlid]

I need all four lines, how much for all 5 items shipped to mn 56031

1986 gn do you have the pressure switch off of the dryer and the wire connector for it? Also the relay for a/c

 

[gnxparts]

Do you have a shifter assembly ?

 

[72olds442]

I had asked a while back about 86 442 grills. Just wondering if you ever found any in your stash. Thanks: Dennis

 

[Intercooled88s]

I have a set of 86 442 grills $65 shipping included.

 

[Intercooled88s]

Do you have a shifter assembly ?

I have a good shifter but I don't have any T handles.

 

[Intercooled88s]

1986 gn do you have the pressure switch off of the dryer and the wire connector for it? Also the relay for a/c

I have the pressure switch, ac relay and wire connector for switch.

 

[Intercooled88s]

For the seat belt release, 87 AC lines, pressure switch and plug, and ac relay $135 shipping included.

 

[72olds442]

I have a set of 86 442 grills $65 shipping included.

If they are in good shape pm me your PayPal and I'll get payment out to you.

 

[skidlid]

For the seat belt release, 87 AC lines, pressure switch and plug, and ac relay $135 shipping included.

Pm me your Paypal and I will send payment

 

[trip]

Looking for a GN Dash Panel, the piece that sits on the passenger side with the Buick and Grand National emblem. PM would be great if possible

 

[72olds442]

PM sent on the grills.

 

[NorCalTurbos]

-84-85 Billet vac manifold(part on top of throttlebody) with prevision for vac brakes $30 shipping included in the US
-AC delete plate $30

-86-87 GN center caps $20 Each
-87 GN dash pad(no cracks and color is nice)$180

-Driver quality 86-87 GN wheels $75 Each

-Mega shifter for Turbo 350 $75
- gray 442 bucket seats $250
-GM crate motor 350 block # 10066036 4bolt mains Edelbrock carb and intake, headers, comp cam 1.6 rockers etc. $900
-nice set of 85 Maroon bucket seats $300

-87 Grand National Engine 100% complete, runs great $2500
-New tranmission shifter cable(after market that fits properly) $18
-Turbo Riviera Turbo $200

-109 turbo block std bore $300
-Good std/std turbo crank $300
-86-87 Engine wire harness(no injector harness) $200
-86-87 Intake manifold(lower and dog house) thats been painted $160


-New after market cruise control shifter lever $30
-Dash plaque for a GN in driver condition $40
-86-87 stock turbo, very little play $250
-84-85 stock trubo, very little play $150
- 84 GN front seats(leather and cloth) need to be recovered $200
-86-87 T-type rims(no center caps) $300 for 4 or 1 for $100
-BRF 200 4r $500
-NOS Turbo 6 emblem $50 Free shipping
-Autometer Boost gauge with A pillar single pod $25
-86-87 original MAF(not Rem.) $90
-86-87 AC compressor $100
-87 Intake manifold(lower intake and upper dog house) $200
-Turbo shield $40
-Rad hold down plate $30
-Front license plate bracket $20
-Doors $400 for set(1 pass and 1 drivers) Pick up only, I wont ship these.
-Vac brake set up $100+shipping(master cylinder, power brake booster, and correct pedal)
-87 442 Passenger side New rear quarter -Make Offer
-gray 87 442 bucket seats $250
-locking T-tops $200 a set
-84-87 Regal T-type header panel(has hole for emblem) with good black paint $200
-84-87 Nice Header panel (Hole for emblem has been filled) $200
-GN driveshaft $75
-Stock 109 Turbo long block(120k) $1000

-86 NA 3.8 Engine complete runs good has 109 block $350
-84 NA 3.8 Engine complete runs good 290 block $250
-84 turbo Regal block .030 over $150
-85 Turbo Regal Block .030 over $150
-109 turbo block std bore $300
-109 turbo block .060 over $100
-Turbo crank(Std/Std but will need to be turned at most .010.010) $250
-Under drive crank pulley and alt pulley $40

Shift cable if you have one I'll take it

 

[Intercooled88s]

PM sent on the grills.

Replied to your Pm.

 

[Intercooled88s]

Pm me your Paypal and I will send payment

Pm sent with Paypal info.

 

[Intercooled88s]

Shift cable if you have one I'll take it

It would be $30 shipping included for the shifter cable.

 

[Intercooled88s]

If Ive missed anyone, let me know. I wasn't getting the Pm and Post confirmation e mails.

 

[yahveh23]

pm please if you have the quarter extension tips for spoiler

 

[Intercooled88s]

pm please if you have the quarter extension tips for spoiler

I only have complete rear spoilers.