2013 Shari Bonecutter Midwest Buick Challenge

Just wondering who all is planning on coming out to this event?

SHOUT OUT, if you got it marked on your calander!
 
I plan on going.. probably just to spectate and enjoy the event. Is there a list of events posted as to what is going on each day and when someplace?
 
Host Hotel - Comfort Suites
404 North Point Blvd.
Elkhart, IN 46514
574-206-1555
Group name - Midwest Buick Challenge
rooms are doubles - 2 queen beds - $72.24 per night



There are a bunch of hotels in a row there. But most of the parking lot entertainment we at the above.
 
Host Hotel - Comfort Suites
404 North Point Blvd.
Elkhart, IN 46514
574-206-1555
Group name - Midwest Buick Challenge
rooms are doubles - 2 queen beds - $72.24 per night


There are a bunch of hotels in a row there. But most of the parking lot entertainment we at the above.
Thanks is the hog roast on again
this year? It was really good last year
 
[/COLOR]Just an update on sponsors:
Finish Line was first to step up
HRpartsNstuff
The BPG was first to pay with results of Charity race and an additional check that has been mailed
E F Anderson Insurance Agency Inc. is continuing their long standing sponsorship
Jimmy's Transmissions has committed for another year
Precision Turbo (PT&E) has gone gold again this year
World of Motorworks has committed to sponsor again this year
Hartline Performance is on board this year
Automotive Machine & Performance - has again thrown in their hat
Caspers Electronics will off their support for our little event
Full Throttle is to send some gift certificates
Scott Klepinger is giving away two tail light darkening paint jobs
Patrick Hall and Sam Cotalillo are giving the Chapter a Turbo Regal air dam to raffle off.
 
What time do the festivities start saturday? Also, are we still doing the cruise-in at simington lake drive in? Thanks -Ben
 
hood,sway bars,int parts 8.5 rear parts
I have a set of used Moser 28 spine axles, used aftermarket rear end cover, used ATR sway bar, couple sets of various ratio rear end gears, etc. Any of that interest you? Interior and hood would be hard as am comming in a car not a truck.
 
Top