RKHiPerformance
Turbocharged Sex Cylinder
- Joined
- Feb 25, 2003
We have a 1983 Regal T-Type for parts. The car is rough inside & out.
It came with a 350 Chevy of unknown history, but the block (casting 14016379) is a confirmed four bolt block. It has a double roller chain and idled with a slight lope. One head is a 487 casting ('71-72 LT1) and the other is a 493 ('71-72 400). Includes balancer, water pump, stock fuel pump & pulleys. We know nothing else about the engine so we are offering it as a greasy rebuildable core for $200. Pick up only.
Other parts include:
Muncie M20 transmission May or may not need rebuild. Seemed okay when motoring around in 1st gear. Includes Hurst linkage but no stick $450
Edelbrock Carburetor with electric choke. May or may not need rebuild. Linkage has been modified - email for details. $75
Four speed bellhousing #3899621 (Camaro/Chevelle/Corvette) Greasy $100
G-body Z-bar $45
Edelbrock Performer intake manifold #2104 ('87 & later iron heads) Clean $75
1983 T-Type Gauge Cluster Seems okay $45
Chevrolet V8 HEI distributor Greasy but it works $25
T-Type 3-Spoke Steering Wheel, no horn button, good core $30
OEM Flywheels SBC rough $25 each
GN-style rear spoiler 5 pieces $160
Prices do not include shipping.
Pick up only:
(4) 15x7 Z28 Wheels ('82-87 style) rough $75/set
GN-style hood with power bulge - seems straight but paint must be stripped $150
T-Tops Glass is good but trim & seals are shot $50/set
Stock Driveshaft $25
Stock TH350 Crossmember $50
2.73 7.5" Posi Rear (informally confirmed with the car off the ground & both tires spin one way test & counting driveshaft revolutions versus tire revolution) We'd prefer to sell this with the shell or sell last to keep the car rolling. $150
There may be more...email us directly (RKHiPerformance@aol.com) for more details and pics and inquiries about other parts. No PM's, please.
We are located in Lake Anna, VA 22553, about an hour south of Washington DC. We will be at Maryland International Raceway for the TNT and swap meet on the 31st of this month. We can bring some of these parts (not the engine or hood) if it helps.
Thanks very much,
Rick
It came with a 350 Chevy of unknown history, but the block (casting 14016379) is a confirmed four bolt block. It has a double roller chain and idled with a slight lope. One head is a 487 casting ('71-72 LT1) and the other is a 493 ('71-72 400). Includes balancer, water pump, stock fuel pump & pulleys. We know nothing else about the engine so we are offering it as a greasy rebuildable core for $200. Pick up only.
Other parts include:
Muncie M20 transmission May or may not need rebuild. Seemed okay when motoring around in 1st gear. Includes Hurst linkage but no stick $450
Edelbrock Carburetor with electric choke. May or may not need rebuild. Linkage has been modified - email for details. $75
Four speed bellhousing #3899621 (Camaro/Chevelle/Corvette) Greasy $100
G-body Z-bar $45
Edelbrock Performer intake manifold #2104 ('87 & later iron heads) Clean $75
1983 T-Type Gauge Cluster Seems okay $45
Chevrolet V8 HEI distributor Greasy but it works $25
T-Type 3-Spoke Steering Wheel, no horn button, good core $30
OEM Flywheels SBC rough $25 each
GN-style rear spoiler 5 pieces $160
Prices do not include shipping.
Pick up only:
(4) 15x7 Z28 Wheels ('82-87 style) rough $75/set
GN-style hood with power bulge - seems straight but paint must be stripped $150
T-Tops Glass is good but trim & seals are shot $50/set
Stock Driveshaft $25
Stock TH350 Crossmember $50
2.73 7.5" Posi Rear (informally confirmed with the car off the ground & both tires spin one way test & counting driveshaft revolutions versus tire revolution) We'd prefer to sell this with the shell or sell last to keep the car rolling. $150
There may be more...email us directly (RKHiPerformance@aol.com) for more details and pics and inquiries about other parts. No PM's, please.
We are located in Lake Anna, VA 22553, about an hour south of Washington DC. We will be at Maryland International Raceway for the TNT and swap meet on the 31st of this month. We can bring some of these parts (not the engine or hood) if it helps.
Thanks very much,
Rick
