Search results

heading to the track and looking for a decent baseline tune with 104 unleaded. I run a TT chip for 94 at 18 lbs on the street without any knock and good o2s. I was thinking taking it to 22 lbs and adding five degrees timing, incrementally of course. Thoughts?

About to do the ta49 upgrade. Can anyone help with a parts list or any tips? I've read it's wise to replace the oil line and not to run any gaskets. Just hoping to get good info before tackling it. Any help would be appreciated!

Please check out the new Facebook group under this heading!

is anyone aware of a good install thread? Upgrading to a new TA49. Thanks!

thanks in advance for looking and help you can offer. Bone stock my 87 GN ran 14.0's @ 98mph. Stock boost, pump gas, no knock Since then, I've added the following mods: AFPR @ 43psi TT 5.7 burned for 94 octane Ls1 Maf and 3" pipe with 9" k&n Adj wastegate 3" TA downpipe, test pipe Dual 3" gn1...

Today, I got my Gn1 dual 3" system installed as well as the TA 3" downpipe and test pipe. I had a local stainless shop do the install as I've never had much luck doing exhaust without a hoist. I am glad I did - the system needed some tweaking/welding. It wasn't significant but needed for it to...

Hey guys, Tonight I installed a new 3.5 in maf pipe and k&n cone with a maf translator. Since firing it up, I have run into two issues: The first startup was very rich and it stalled. After a quick road test and running the car for fifteen minutes the idle issues were gone. I let it cool down...

Hi guys, just got the 3.5 maf pipe kit with k&n come from full throttle. Just wondering where I should mount the intake temp sensor now?

Installed a scanmaster today and it's working fine. I've made several good pulls with the car, came back and recalled no knock and o2s of 800 and 812. This car is bone stock, with 34,000 miles. All other readings seemed within range. Tps was 40 at idle and 4.18 at wot. Is this normal? Just want...

With my Powermaster failing I took the plunge and converted to vacuum using the gbodyparts conversion kit. Bottom line, my brakes work great now! I followed the instructions on Toms T Type page just using the gbody kit because I did not have access to a pedal locally from our junk yard . Toms...

Has anyone ever heard of the the Bowling Green Customs "Street Plus 10" Chip. Someone is trying to sell me one but he doesn't know anything about it. I just want to know what kind of combo it is for. Thanks!

I wrote earlier about my 2.59 60ft times which made me almost cry. I could not build boost at the line so I just brought it up on the convertor a little bit. I have a rip in the turbo hose between the intercooler and the turbo. It whistles pretty loud, but still builds 15lbs top-end. Is this...

There is a leak in my turbo hose between the turbo housing and intercooler. It is shooting oil out onto my fan. I plan to replace the hoses shortly. Is there a way to block off the breather without hurting anything?

My car ran 15.49 this weekend in good air. It has 314000km on it. Everything is stock, is this normal?:confused:

I am off to the race track tonight to get a baseline on my stock TR. I will actuallly be swaping in a K&N after a few passes just to see if it does anything. Also, I was wondering if I should bring some ICE to cool the intercooler and intake. Is this a good idea?? My car seems to be a real dog...

Anyone tried the CATCO CAT summit sells for $100. Good/Bad??

I say Merge GNTTYPE and TURBOBUICK into one massive TR euphoria!! LOL

All I want is a 13.99 out of my stock 87 TR. Tell me the easiest, cheapest mods to get me there. I have been searching on here, and everyone says something different. Please help -Confused TR owner!

Just when I thought my my TR was fast.....I realized the vaccum line was of the wastegate and fried from heat. I ran new lines (hopefully correctly) and I tried to pry open the lever with no luck. It has probably been siezed for years. Any suggestion on how fix this problem??? -Thanks

anyone ever used the thrahser 92-30-K2t.0?