Search results

  1. J

    How can I tell if my pump has been hot wired?

    How can I tell if my pump has been hot wired? What to look for under the car ?
  2. J

    Which 42lb injectors are these ?

    Ok guys I got the numbers. d3181ba Can anybody tell me what they are ?
  3. J

    eric, what additional info will you need about my injectors to burn a chip? i know they are...

    eric, what additional info will you need about my injectors to burn a chip? i know they are 42lbs (based on existing chip) and the part number on them when i twist them is 2497. what additional info do you need to burn the chip? also the info for the speed. you want the difference in speed...
  4. J

    Steering column part

    Does anyone know where exactly this piece goes in the steering column ? It is on the left bottom near the cruise Control and left turn signal. Any help pictures or diagrams would be apreciated. Also there is one tiny small spring that came out not sure where that goes haha.
  5. J

    Which 42lb injectors are these ?

    I turned them and 2497 is the part number. Any insight ?
  6. J

    Which 42lb injectors are these ?

    I was hoping someone could ID them as I saw no part numbers on them and it looks like removing the fuel rail is a pain in the ass
  7. J

    Which 42lb injectors are these ?

    Hello I'm about to order a turbo tweak chip but I need to know what type of 42 pound injectors these are? Below are some pictures thank you for the help
  8. J

    will you take $100 for the power logger?

    will you take $100 for the power logger?
  9. J

    powerlogger

    need a powerlogger
  10. J

    Removing Downpipe - gaskets

    what did the factory use?
  11. J

    Removing Downpipe - gaskets

    do you need to put permatex on the "TURBO TO DOWNPIPE" connection? is there usually a gasket there? I assume for the "DOWNPIPE TO EXHAUST" gasket there is just a regular exhaust crush gasket.
  12. J

    running alcohol on a 93 octane chip 15psi

    will 42lb injectors support 22-26lbs of boost with alcohol?
  13. J

    running alcohol on a 93 octane chip 15psi

    also how do I know that I will actually be able to adjust my wastegate to the certain psi? for example i order a 26lbs chip and I cant even get that high by adjusting my waste gate (i heard this is a common problem, meaning you are trying to run more boost than the stock actuator rod can...
  14. J

    running alcohol on a 93 octane chip 15psi

    "If you sit in the passanger seat the kick pannel that is next to your right foot. Remove the little round plug and the pannel comes off its behind it." found it thanks....
  15. J

    running alcohol on a 93 octane chip 15psi

    where exactly is the computer? under the kick panel driver side?
  16. J

    running alcohol on a 93 octane chip 15psi

    do i have to remove the fuel rail & injectors to confirm the injector size? I can't seem to see any marking on them?
  17. J

    running alcohol on a 93 octane chip 15psi

    what type of boost should i be requesting for the alcohol turbo tweak chip on the street? any recommendations for a street car, i still want the car to be able to be daily driven. how do I know I can obtain this amount of boost with the manual adjustment on the turbo? (i dont have a boost...
  18. J

    running alcohol on a 93 octane chip 15psi

    can i run an alcohol system on a 93octane chip. I am current running great with no knock at 15lbs of boost at the moment. can i use the same chip i have, install the alcohol kit, and just crank up the boost to 20-22lbs? I assume this would be safer than using a "alcohol tuned chip" , as I'm...
  19. J

    few questions about new setup

    what is the target AF ratio (using a wideband gauge) to shoot for if I'm tuning with 5.7 TT?
  20. J

    Vendors @ Bowling Green 2015

    is turbotweak going to be there? would we be able to get chips burned there? anybody selling powerloggers, or widebands there?
Top