Search results

failed for High really High HC's,also failed the visual for coolant bypass hose and fuel pressure regulator hope I can find the stock one.. would a stock regulator help with smog and what is the stock fuel pressure set for? I have a TT smog chip for my setup, the only weird thing was that my my...

wanted slic or fmic precision preferable but open to all ic's got ripped off on a precision slic so I don't have an ic at this time. need all mounting hardware if its fmic I have piping but would prefer complete any and all intercoolers. thanks Isaac

I had a problem with my ignition 1 bank they all went dead so I'm looking at the fuse-able link on the starter . So I traced all of the wires that were in that bank and noticed that the gray wire that comes off of the alternator plug is plugged in the top ignition 1. I've looked everywhere but I...

I started my car and after about Five minutes the fuel pump shut off. I found that the IGN circuit on the fuse box for IGN 1 all three of them had no power but I have power on IGN 3 is there another fuse inline somewhere that is feed from the ignition box on the steering wheel column because I...

Running A TE45a turbo plus the mods in my sig, I hate to say it but I dont know the potential output for this setup so I dont know what I need. I know I need a trans looking In California but dont know who is reliable. Thinking Extreme automatics also I need a torque converter but what stall...

1. if im running a walbro 340 fuel pump can it handle 80# injectors or do i need to upgrade my pump? 2. can you put an inline flow through fuel pump and use it with the 340 if necessary? thanks Isaac

Can the cam sensor cap if it is cracked cause the check engine light to flash but not stay on? Im getting a CEL but im not showing a code on my scanmaster or code reader but when I rev at the top of the rev and when the rpms come down or if I hit a bump, the CEL will flash and Im running out of...

I have changed my injectors to 80# injectors with matching tt chip, scanmaster. Im not getting any unusual readings on the scanmaster but I am getting a check engine light when I accelerate and when I come to a stop does anyone have any ideas. the car hesitates when I punch it at all and...

Looking to buy a maf translator for my 87 GN. Thanks, Isaac

How do you get the digital dash in 87 GN to register above 85 MPH? Thanks Isaac

I have been having some vacuum problems and I am trying to narrow down the possible leak my 87 GN analog dash. 1. I found two vacuum lines that run under my A/C unit in the engine bay but didnt find them under the dash in the car, are they supposed to be there and if so what are they for? (and...

I just installed a set of 80# injectors and a matching TT chip what should the fuel Pressure be set at to run these injectors? Isaac

Hey guys when I try to get to WOT my car makes a loud pop that looks like it goes back through my intake. I just installed 80LB. injectors with matching TT chip and a scanmaster I have no faults or knocks when this happens. If I slowly boost it will hold the boost but if I punch it it pops then...

Im a novice with these cars and still learning what I need to do to increse my engines performance. I purchased my 87 GN in 2007 with 23k mi on it and the motor was freshly built with 500 mi on it after the build. Im trying to find out what type of injectors I should run on this motor and got a...