Search results

Anybody know a replacement part number for the fuel sock used with the Walbro 307/340s? Mine is pretty clogged and would like to replace. On another topic, anybody have problems with the search feature on this site? It only seems to work for me a fifth of the time or so.

Has anybody here ever replaced the fuel feed line that runs over the axle? I was looking at mine yesterday while changing the fuel filter and its getting pretty rusted up, along with the piece that runs along the frame rail. The reason I ask is because I'm changing some body bushings and will...

Got my Red's TH downpipe in the mail today. Went to install it and it won't fit. When I tried to attach the dump to the exhaust I'm about a half inch too low. If I try to push the downpipe up any farther it hits the bottom of the AC box. I doubt its the pipe, it looks great. The car has...

Looking for a set of the black GTA wheels. Need 2 fronts and 2 rears. Would be willing to trade a set of Telstars w/ tires if it interests anyone.

Looking for 20 bolt oil pan with the baffling. Currently have a non baffled pan, and would like to swap over while the engine is out.

I tried doing a search on this, but it didn't seem to be working. In the last day or two I've noticed a drop in oil pressure at WOT. At normal cruising, pressure is usually 50-55 psi, but when going to WOT the pressure drops quickly to about 30 psi or so. This seems to have became a problem...

Does anyone have the stock settings for the PAC kit as it comes? I screwed around with mine, but learned I had some other problems unrelated to the kit, and want to make a fresh start at getting it tuned. Thanks.

This is driving me nuts, so I figured I'd see what you guys have to say. I've been chasing a lean condition at WOT for a while, and am running out of ideas. The O2's are dropping down into the 600's during wot runs. I tried adding fuel with the trans+, but it doesn't change anything...

Did a search and couldn't find any info on this, so here goes. For those of you that have swapped to the aluminum bumper supports did you use any different hardware with the install? Reason I ask is that the factory manual advises using different bolts on the aluminum supports. IIRC I've also...

Man, this car is driving me nuts. Anyway, back around X-mas while swapping the heads on the car, one of the connectors for the translator grounded out and seemed to cause an electrical discharge. Got the car fired up, code 4x (EST code). Jumper around the Trans, code goes away. Got new Trans...

Does anyone know if a code 33 or 34 will still show up if you're running an LS1 Maf and Trans +? Around Christmas while changing the heads on the car a small electrical discharge happened. After starting the car up it ran like crap and threw a code 42 (I think, whatever the EST code is). Went...

After doing the TPI swap I've been running into lock up problems. The trans is locking up at about 30 mph or after shifting into 3rd. I'm assuming it has to do with the pressure switch, but I'm not really sure. I checked the wiring in the trans and everything seems to go to the correct...

Okay, heres the problem. After getting the 87 running after almost a year the speedometer started acting up. Once the car gets past about 55mph the needle starts acting crazy and going back and forth. You can hear a noise in the dash. I had the speedo out once or twice while it was sitting...

Is there a D4 converter for the Th-2004-R? I just checked the numbers on a conveter I've got laying around, and that's what it looks like it says. Anybody know what this came out of and what the stall speed is? Thanks.