Recent content by steve kowalchyk

It’s a Hood mountedmechanical fuel gauge from Kenny Bell car only idle for about 30 seconds then shuts off And I also have a fuel gauge right in front of the fuel pressure regulator, Both read the same dirty 35 pound

transmission rebuilt My transmission was rebuilt by David Husek.He did a great job on my rebuild and is very informative on any transmissions questions and any other questions i have on my gn.Great guy to talk to and meet and would highly recommend him for any questions on transmissions and...

the tool i used looks like a small narrow c-clamp that hooks onto the bottom of the springs with two hoohks, as you tighten down on the top it compresses the spring to get the locks out,i first had to pry off the shields that were around the springs,you can find a picture online off the tool if...

im looking get my stock tramission rebuilt or replaced,it only has art carr shift kit installed, starting to slip between 1st and 2nd,i live around albany ny area.would not mind shipping it out to be upgraded to handle up to 500hp.any place in mind let me know, thanks

thanks for the help new springs do have internal damper spring

im replacing stock valve springs with new 100 # ones, there is a shield around the stock springs,does this shield have to be put back around new springs or can it be left off.i am using a spring compressor tool with heads on engine.tool is tightened down on top of spring,should i use a bar type...