Recent content by Sborel

I see full throttle has PATS D5, anyone have experience with this unit? Steven

Is .048 in too much end play for a used D5? Gm says under .050 is ok. Steven

I wouln't call the wiring adaptation easy, but possible with an understanding of auto electrical circuits and be able to read wiring diagrams. Sorry, i don't have extra copies of electrical diagrams. The alldata diagrams are the same as GM and the Chilton versions are poor to say the least...

the f-body radiator is a direct bold on deal, just move the rubber pads on the lower radiator support. The stock upper and lower rad. hoses are used.(used new parts) The stock tranny cooler lines wont bolt up, but will need adapters and some short hi pressure rubber lines, no big deal. I used...

The conector at the firewall is the same on the el camino but terminals/wires are missing for the fan ign feed, and fuel pump power feed. I added coilpack power circuit(7.5a) with a fuse holder wired to fuse box ign spade. Did the same with injector power/ fuel pump relay primary. A complete...

Thanks 4 the tips. I noticed using a single flourescent drop lamp really highlights scratches and swirl marks. Im still not done polishing, i used up all my free time, but will be back at it this weekend. I have'nt done any damage, but i have to go back to few areas that did'nt enough #3000...

I got a little carried away! I did'nt realize how many hours and $ it would take to get this far. I would not have soda blasted car if i knew all the extra work it created. I had to paint the ALL the jams due to damage from blasting, my painter did'nt want to paint them so i had to learn...

sale pending....hopefully it will find its way into a t-type :D Steven

motor still available, pics sent, thanks guys Steven

did u check dealer or gmpartsdirect.com, gm had a few left not to long ago. Steven

pics available upon request :cool:

E-mail me neal, Im in Northern Cal. 1.5hr north of san francisco. Steven

9 TO 1 asa STAGE 2 longblock Bryant billet crank, standard/standard 3.590 S2 heads ported, matched s2 intake jessel rockers, hamburger pan set up 4 dry sump, no pump appears to have little run time since built, 2 mains cross bolted, block looks perfect, no cracks or repairs. J E...

I recieved my stage 2 motor a couple weeks ago, its was built with top quality parts like carrillo rods, Bryant Billet crank, Jessel rockers etc. Just like Geno said it would be, anyone considering a S2 the old Busch, and ASA engines are a good value. Buy with confidence with Gene. Thanks...

Bob, please tell me more about your Dry sump set up. Are the parts available, and good source etc. Cost? Pics? Thanks Steven