Runs fine no poping throttle is opening all the way. Will get scanmaster numbers. copper rtv on down pipe so no problem there. disconnected boost control and slowly layed into the throttle to see if it would build boost so no need to try different boost control. No idea what to check.
Having trouble after pulling the car out after the winter it will only build 4 psi.
checked all the basic
vac leaks
checked for leaks in the intake
checked for exhaust leaks
wastegate
boost control
downpipe pluck
I am at a lost any ideas?
The wipers where not working right on it, so i took the motor out and unscrewed the plastic cover on the front. Well long story short the circut bored is fried. Anyone know where i can get a new one the part #22038486.
Thanks
My motor is a fresh rebuild with about 800 miles on it. When i start my car i get a blue puff of smoke, it last for about 3 seconds. If it sits over night and i start it this wont happen. It is only if you have the car running and shut it off and you restart it within 6 hours or so. Does not...
Well i have not looked at my iac numbers in a while, so i dont know how long this has been going on. To start with yesterday my car stalled at a light so i checked the tps and iac. The tps was .44 iac was 96. So i did reset it using this IAC Reset Procedure the car was hot. Well i took the...
I am looking for a standard 109 block that was never machined with caps, or a short block that was never machined or taken apart. I am look for one in the new jersey area.
Thanks, John