Recent content by 19mutantx87

I have a complete system removed from car. DFI computer, all wiring, serial cable for Toshiba laptop and version 6 software installed. Looking to get $500 for all......shipping not included. All you will need is a 3 bar map and good to go.....with the correct tune. Contact me at...

Accel Gen 7 DFI for sale. ECM unit, serial cable, Toshiba laptop with software installed. looking for $500 for everything...plus shipping.

Fuel pump is coming up and primed. Getting injector pulse and fuel pressure is very good. Plugs are not really to wet though. Getting plenty o spark too. Set cam sensor this evening with cam sensor tool and checked injectors with Noid too. Changing out the cranks sensor tomorrow to see how...

She ran really nice on the Accel Gen7 before I blew the heads and subsequently did both gaskets. I was thinking the calmap software should be seeing SOMETHING at RPM while I am cranking!! I have already arranged to borrow a cam sensor and crank sensor to try swapping them out. I believe it...

Thank you....I will take a look at that. It is something trivial that is causing the car not to start. Car is a highly modified street car. I want to get it running on a base configuration, of DFI, so can tune from there. I will let you know what I find under the cam sensor. I appreciate...

Does anyone have or know what parameters I should enter to get the basics to get car to run. Did head gaskets and car will NOT start now. Initial turn of the key and it tries, for a second without cranking, to start...a nice cough. Then just cranks away forever. Wait a couple hours and will...

Blew head gaskets on car. Replaced head gaskets on car. Everything went back together. Car now coughs on initial key turn and then just cranks away for ever. Go back to it a couple hours later, and gives a nice cough\try to start on initial key turn, then cranks away for ever. New Delco...