I cant see combos on.my phone.but u have heads and bigger ic? ThxCombo in my sig. This was on a safe street tuneup. Adding alky within the next month or two and retuning. A lot still left.
Boost: 19.5
Timing: 19*
Fuel: 93oct with 7 gallons of VP110, no alky
Tires: MT ETs 255/60/15 @ 17psi
Air temp: 75*F
60 ft: 1.73 10psi off ebrake
1/8: 7.67@90.12 locked the converter here
1/4: 12.01@113.36
Oh sorry. Short version: 4.1 block .030 stock stroke, Comp 212/212 roller, 885 lifters,1.6 roller rockers, ported stock heads & intake, GN1 SLIC, 3in full exhaust, external waste gate.I cant see combos on.my phone.but u have heads and bigger ic? Thx
These are some pretty pathetic times with that large turbo. Where are the guys running REAL numbers so we can see how that turbo performs?
ks
OH RLY ? Well get yourself a 6262, crank it up and let us know how that works for you. Otherwise, don't bash other people's times. 90% of people aren't using it to the full potential. Yea my 12.01 isn't setting the world on fire but i did it with under 20psi and no timing. MPH was there for 11.80-11.90's. Was also my first time ever on a track .These are some pretty pathetic times with that large turbo. Where are the guys running REAL numbers so we can see how that turbo performs?
ks
No still.putting motor.together. was shooting for high 10s. Champion.irons.ptc 3000 nl diers stage 2 trans
25-26psi should get it done, maybe less. Buddy of mine went recently 10.97@123 with a TE62 @26psi on alky, stock bottom end, 210/214 roller, ported stock heads.Yea. I.was going to.get the 6466 but its just too much. I might go that route if I rebuild motor.. weather still.crappy up by me so.I have some.time.. hopefully I dont have to run 30psi to get into.10a
25-26psi should get it done, maybe less. Buddy of mine went recently 10.97@123 with a TE62 @26psi on alky, stock bottom end, 210/214 roller, ported stock heads.
6.961@97.89. You should be in the 10.70's I would think.What was your buddies 1/8 mile time? My 1/8 mile 6.795 was run at 26# and I am pretty sure that 1/8 mile equates to a solid 10 second run.
6.961@97.89. You should be in the 10.70's I would think.
I'll be in the hunt for the same slip. I figure installing alky kit, more timing, and 23-25psi should get me there if I can get the 60ft down. Best was 1.66.That's what I thought. I need to get to a 1/4 mile track and get a 10 second time slip. Until then, it is all conjecture.