Gauging Interest - May part an 89 TTA

[streetwavesauto]

Hey all,

I am about to head out of town for the week. I picked up a TTA this week in pretty neglicted condition. Long story short I don't think it makes sense to fix the car up. It had been hit and poorly repaired in the passenger quarter and drivers fender. The car seem to be fairly complete.

I am debating between parting it out or taking the guts and putting it into another project vehicle. Let me know what kind of things you could use off this thing.

I will be online throughout the week to respond but wont be able to get any pictures or anything up till Friday.

 

[dsmith4994]

rearts wanted

Put me first in line for the following
i need the following 89 TTA specific parts:
1) Fuel line bracket and clip that attaches to the valve cover
2) Catalytic converter hanger bracket
3) TTA specific Dash harness complete with vats
4) original exhaust tips with tailpipes if still good
5) Mint 89 door panels taken off nicely (No wrinkles in fabric)
6) Plastic sill plate on the drivers side (no cracks)
7) interior plastic between rear window and t-top (approx. 4 feet by 10 inches) (no cracks)
8) gta center caps that say ws6
email me with pics, questions and/or prices to dsmith4994@aol.com or call dave at 203-623-6516 or PM me

 

[streetwavesauto]

David - I have you very first in line. I will ping you when I am back in town on Friday/Saturday so I can relay the condition of these items to you. I will make a decision by then as well if I move forward with parting it.

 

[fast400]

Scott,
I need the lower front L spoiler piece under the nose. If the nose isn't damaged, I'd also need that.

 

[streetwavesauto]

fast400- I think I have all of that in good shape.

I have decided today that I will part the car out.

Those listed on the thread will have priority on the parts. I will verify condition and get pricing out on Friday. hopefully that works with everyones timelines.

 

[jarredsoon]

i will take the belt tensioner please

 

[1tufam]

TTA parts

I would be interested in some interior parts:

Passenger seat belt guide with connecting ball
Both armrest bezels (plastic washer where upper attaches to door panel)
"bird" embem that covers latch screw
exhaust pipe from cat to muffler
BW maf sensor

Thanks

 

[BEATBY6]

I would be interested in the pass side fender,ungutted cat. conv,vehicle speed sensor mounted on the end of the trans.Any pics? Thanks,Scott

 

[streetwavesauto]

I just got back into town everyone. If it warms up a little tomorrow I will get out there and get condition and pricing together for you on the parts requested.

 

[streetwavesauto]

Here is some pricing I have put together. Not looking to part it out as bits and pieces but rather as complete packages. This car needs to fall apart within the next month or so. I will respond back to everyone that has expressed interest in parts already and will retain the same priority for folks who have already expressed interest in parts.

WS6 CenterCaps (2 available) - $15 /each

Complete Engine - $3500
· 83k miles
· All original – not modified
· Includes everything from the top of the plenum to the bottom of the oil pan
· Includes all of the accessories, downpipe and turbo

Stock Intercooler - $75

Transmission with Cross member and Converter - $550

9 Bolt 3.27 Posi Rear End (no brakes) - $250

Front Seats (need to be recovered) - $200
· Comes with seat tracks and motors
· Comes with harness for lumbar bladders

Rear Seats (need to be recovered) - $200

Gauge Cluster - $350
· Shows 83k original miles
· Comes with lens and gray plastic surround
· Gauge Cluster Harness available for + $150

Center Console - $150
· Great condition – no splitting
· Comes with base, shift plate and arm rest console

Radio Pod - $40

TTA / GTA Steering Wheel / Radio Package - $300
· Complete Steering Column with stereo controls
· Stock radio
· Steering wheel will be included but is not in great condition

Dash pad - $100
· One light crack in the defroster vent
· Otherwise it is in outstanding condition

Seat belt set – Front and Rear - $100

TTA Taillights - $250
· Includes TURBO center section in very nice condition

TTA Hood - $100

TTA Doors with Mirrors and Glass - $100 / each

TTA Fenders - $100 / each

Glass T-Tops - $250 for both

Complete bumper and ground effects package - $500

Headlights with headlight motors – complete assembly - $75 / each

Aluminum Driveshaft - $150

Quarter Panels - $250 each (you remove)

Door Panels - $100 for the set

Drivers Door Sill - $25

Gas Tank - $75

Misc Emblems - $125

 

[streetwavesauto]

i will take the belt tensioner please

Jaredsoon - I am looking to sell the motor complete.

 

[GNVenom]

Is the engine harness available and complete (not hacked up)?

 

[streetwavesauto]

Is the engine harness available and complete (not hacked up)?

John - i am pretty sure it is all there and unhacked.

 

[GNVenom]

I'd be interested in it if it's complete. I'm looking for one to disassemble. PM me a price or trade for ??

 

[streetwavesauto]

I'd be interested in it if it's complete. I'm looking for one to disassemble. PM me a price or trade for ??

I would like to get $350 for the harness.

 

[GNVenom]

Once you get it out of the car, I'd like to look at it closely...important that it's 100%.

 

[jarredsoon]

I'll take the drivers door sill if not all cracked up

 

[streetwavesauto]

Once you get it out of the car, I'd like to look at it closely...important that it's 100%.

John - no problem. I will be tackling the big stuff in about 2 weeks. I will be sure to get back with you on it once I get it all out. I will be as careful as possible getting it out.

 

[streetwavesauto]

I'll take the drivers door sill if not all cracked up

I took another look at the drivers door sill after posting the pricing and it is actually cracked in 2 spots. Sorry about that.

 

[charlief1]

How much for 2 front rims? I need 2 more for my project.