Recent content by zombie2

I was in marinetta georgia this weekend to pick-up a dog with a friend of mine an we were going to jump on i-75 off windy something road (forgot the name ) and just happened to look to my right and saw a bunch of really nice turbo buicks . and was just wondering if any one here was there ....it...

I reset the crank sensor as far as it working I unplugged it and the car would not run is there a way to check with a volt meter or something.

BY THE WAY ANY IDEAS ON THE TIMING ISSUE I'M COMPLETELY STUMPED CAM SENSOR IS RESET AND CRANK TRIGGER IS ADJUSTED . THANKS REGGIE

THANKS REGGIE ONCE AGAIN , SORRY I DIDN'T EMAIL YOU THAT PROGRAM MY GIRLFRIENDS LITTLE BROTHER CRASHED IT AND I JUST GOT A VERSION OF WINDOWS .

anyone ?????? i'm out of ideas

Car runs rich at idle even when I bring the value in the fuel map as low as they can go . It's also stuttering and popping through the intake under boost , the timing at the crank is 11 deg and in the timing map it is 33 deg. I reset the cam senor and crank trigger and there is no change . any...

could a bad coil pack and module cause perhaps a weak spark causing the car to run rich at idle because even when i make the values in the cells as low as they can go it's still rich. just an idea thst came to me ...thanks

map is reading properly

o.k I checked the crank trigger and adjusted it I also reset the cam sensor because it was off . still no change and the car will not make any power under boost and will "pop" through the intake side .......here's the other thing that has me stumped with a timing lite it shows 11 deg at the...

thanks reggie I will email it to you when I get over to work on it probably thurs. night . I might be able to drive my car soon it's been almost two years . Once again thank you very much for all the help

Thanks Guys i'll keep you posted

THANKS REGGIE , I'M WORKING ON IT TUES IF WEATHER PERMITS AND LET YOU KNOW .....I HAVEN'T RECORED ANY DATA YET BUT WHEN I DO I'LL LET YOU KNOW...

THANKS REGGIE , THE CAM SENSOR SHOULD BE O.K. WHEN I ASSEBLED THE MOTOR I BOUGHT THE CAM SENSOR TOOL AND I BELIEVE THE SENSOR WAS WORKING CORRECTLY . WHAT SHOULD I LOOK FOR WITH THE CRANK SENSOR OR SHOULD I JUST REPLACE IT ? ONCE AGAIN I APPRECIATE THE HELP

the program i have in it is a joe lubrant program i think the program is good . i worked on the car last night . I lowered my fuel presure it was 58lbs (no vacum) so I set it to 43lbs it's alot better at idle . Here is what it is doing know the car idles and runs fine but when the car tries to...

I would appreciate it if you could e-mail me that .I'm going to work on it tonight I really appreciate all the help . thanx