Recent content by WOOSHH

Thanks Pete-thats what I wanted to see.I have a low mileage GN that actually stops pretty decent,cruising around with the stock hydroboost set-up and now w/the S10 stuff I can safely do some highspeed runs and know she'll stop a hell of alot better. Thanks for everything.

The answers to what everyone needs are in the posts. You need the knuckle (SPINDLE) assembly that includes the rotor,caliper,wheel bearing and the spindle. You do not need the upper and lower control arms or tie rods from the donor vehicle.

Got the link-that caliper is way better than the one Baer offers.Baer uses the ZR1 caliper which has 38mm pistons.That looks exactly like late model Camaro and Corvette calipers which have 40mm pistons.With the stock hydroboost set-up that is gonna clamp down a whole lot better than the stock...

Thanks that would be great if you can try that GN rim.

Thanks-this is better than the Baer 11in system.This caliper looks very similar to the C5 Corvette caliper. Do you think it will clear with a 87 GN rim?

What do you need off of the Blazer?

I have them on a 94 Buick Roadmaster wagon.Delum bushings on the upper and lower control arms.I also have Hotchkis springs and Bilstein shocks.The ride is stiff and good on a smooth road like a highway.Hitting bumps is harsh-but the handling is unbelievable.You can take a control arm with a...

Alot of guys use Kirbans rear springs to give the car some rake.

I have an orig 11,000 mile car and there was no rubber isolator on mine. Thats probably whats giving you the extra height.Give Hotchkis a call and make sure you have right part# for your application.Even w/ the rubber installed on the front it shouldn't raise anymore than an inch.

Around 6 months ago I installed Hotchkis springs and Bilstien shocks on all 4 corners.The car sits perfectly level.Check again to see if you installed your fronts correctly. Did you use any coil spring isolators? That might be why your high in the front.The factory doesn't use them in the...

I believe you only have 20 at idle and when your driving they scan those number's.

Thanks-I was getting the knock at WOT IN 4th gear and holding it there for a little while.So I guess at the track these cars don't see 4th gear.

How high can I go on the fuel pressure?

What's a good fuel pressure to run for a 87 GN with stock turbo,injectors,Red Armstrong XP pump,93 chip, ATR 3in down pipe and adjustable wastegate.Right now I'm running 17 pds of boost and detonating in 4th gear with 40 psi's of fuel pressure w/ vacumn connected.I'm fine in all other gears with...

Those stud things are suppose to stick out a little.Put the black sticker over it to give a finished look.