Pypes catback

[bdfeenie]

Any suggestions for a target spot to drill into the frame rail for the tailpipe mount? I removed an old cross flow flow master, and am struggling as to where to mount the hanger... Uugh!

 

[pacecarta]

about an inch from inside the rail about 2.5" back from the large hole toward the axle
what i do is drill a 3/8 hole , reach through the large hole and drop a bolt with a lock washer on it through the hole and then put a nut on and zip it up
now you have a stud to slide the bushing onto , then a flat washer and a nylon lock nut

 

[bdfeenie]

Sweet! Thanks!