1986 Buick T-Type stage II

[limitedv6]

Just throwing this out to see if I find something else

1986 Buick T-Type charcoal grey lots of nice fab work.

Chasis

Chrome moly cage with halo around the top
Frame rails notched to the back of the frame and reinforced
Anti roll bar
QA1 coil overs on all four corners
Weld pro stars 15 x 5 fronts 15 x 10 w/5.5 bs on rear
5 point harness both front seats
8.5 rear end moser axles w/ 5/8 studs
Wheel wells have been widened about 1.5 in but look stock

TRANNY

Lonnie best of the best 200 with brake and billet parts works great
Bradco converter 9 in 3500 nl

MOTOR

4.1 stage 11 off center 4.042 bore has 1 sleeve but has not been a problem
BMS 3.590 wide journal crank
DLS 6.350 rods new
CP pistons from Dan new
New race bearings
BHJ balance
SFI flywheel
New DLS front cover and oiling system
236-236 roller cam
M&A stage 3 heads never been repaired all fresh
1.6 rockers
Stock intake ported to match heads
65mm throttle body and plenum

FUEL SYSTEM

-10 braided lines
SX pump and filter
Spare SX pump and filter
Weldon regulator
80 pound injectors
Razors dual Alky kit


TURBO / INTERCOOLER

Precision 76 4-bolt
3.5 DP and exhaust stainless
PTE front mount

ELECTRONICS

Shift light
Boost Gage's
Lc1 WBO2
Power logger
Translator
LT1 MAF
TT pump gas Alky chip
TT race gas chip
Shift light
Oil water etc

I know I am forgetting a lot of stuff I have pics that I can text. The car is presentable but needs paint. I am throwing this out their to see what happens. I would be intrested in trades but must be a decently fast car or killer sleeper. I have to put a price on it so 18.500 obo would like to trade for another Buick or older muscle car c5-c6 vette etc. the car is built with some of the best Buick parts out their some of it is old school but this is a killer street car and the chasis is awesome. The motor needs to be put back together which I plan on doing but the car has been together with this motor. The hard work is done all the parts hunting and fab work is done all acc work except the air which needs charged or compressor replaced. The car is a climate control car also.


Thanks price is OBO but I hope to trade on a killer street car.

 

[limitedv6]

At the top of this pic

 

[Squid4life]

Pics and location?

 

[limitedv6]

I am in central ky and I can text pics if you pm me a number

 

[limitedv6]

A pic or two

 

[Squid4life]

Would like to see pics of the interior/ cage if possible.

 

[Steve]

Was this car for sale in the Pacific Northwest area a few years back? If it's the car I am thinking of it's a very nice car.

 

[limitedv6]

No I have had the car for a few years.

 

[limitedv6]

More pics

 

[limitedv6]

I do like limiteds if their is any nice built ones out their or GN's that would run in THS

 

[limitedv6]

I may sell the car minus some stuff I would like to go THS racing and this chasis won't work. I would like to keep the tranny combo as I know how hard it is to get a good 200 and this one works great. I guess it would just depend on what sold if I was to split it up any.

 

[1987T]

Would you be interested in Selling the engine Trans Converter and computer & Engine Harness???

 

[limitedv6]

I will have to think on that one I would if the chasis sold first

 

[1987T]

I will have to think on that one I would if the chasis sold first

Ok Let me know I have cash in hand and can pick up if your not to far from Mi.

 

[limitedv6]

TTT any trades

 

[1987T]

My Mustang we have been talking about
Working on getting the cash and time to make the trip down to you. Is the motor back in the car?

 

[fastlikeanascar]

Are you only looking for a GN , I have a 1968 big block 4 speed camaro ... Looking to deal off for a 2nd Regal