Search results

I use the dual fans off a 2000 pontiac grandam and they work great, have been using them for 4 years now with no problems, have big front mount intercooler from jack cotton along with factory air and on a 90 degree day with the a/c on the engine temp gets up between 180-185 degrees and no...

I also purchased a few years ago a jack cotton frount mount and I think it is the best one out there, I run a cooling fan off a 99 grand am which is a dual fan setup and have working a/c and on a 90 degree day the car never see's over 175 and that is with a 4 core copper radiator.

I have a 4 core copper radiator with the trans & engine oil coolers but I use a seperate cooler for the transmission alon with a very big jack cotton front mount intercooler and the a/c condender which blows very cold air and I also installed a electric fan assy. from a 99 pontiac grand am which...

What is the difference between the te45 and the te45a? I was told just the te45. Thank you

I have a chance to either pickup a te63-1 or a te45 turbo and would like to know which one would be better for me. I recently had a ta60 turbo and sold it. This turbo was ablr to get me running 11:16 at 122mph in the 1/4 mile with 22lbs of boost on 110 octane. The engine is 30 over with stock...

I also have an alcohol injection kit from smc and the knock numbers do not change when I turn it on, I checked my down pipe and it is not hitting the frame or heater box the transmission mount is about 6 months old do you think it could of gone bad.

I have a problem with very high knock numbers when the car downshifts, if I start from a dead stop and accelerate wide open throttle I notice that I pick up about 2 degrees on knock on my scanmaster with about 16lbs of boost on 94 octane gas. I have both poly motor mounts and new exhaust system...

I am running 21 degrees on the chip and 15lbs boost

I need help figuring out my car, I have a fresh rebuilt engine with a ta60 turbo, 55lb injectors,front mount intercooler, 206 cam, and cast iron ported heads with bigger valves, I have about 400 miles on engine and am having a very high knock problem between shifts, my scanmaster shows 38...