Search results

If anyone is in or near British Columbia, Canada, there is a GM dealer there that has the last overflow bottle listed in Canada according to my local GM dealer.

Looking for some advice on installing an Alkycontrol kit on my stock 87 GN. The motor has always been well maintained with regular oil and plug changes, spring cleaning etc. but is basically stock internally. It has 100k KM or 60k Miles on it. Basically a well maintained "driver" Turbo is a...

Greetings from Ottawa Ontario, Canada. I am heading to Myrtle Beach week of March 15 to 20 Was wondering if there are any cruise nights that week or maybe a hangout where the Buick guys get together. Roy

In 1986 the GN was redesigned somewhat and they added an intercooler, reprogrammed elctronics and moved the turbo to the front of the engine (among other things). It produces more horsepower than the 84-85 and there are more aftermarket parts for the intercooled cars. They also produced alot...

While I own a GN and not a T-Type, if I remember correctly it should be Buick only on the right trunk lid and Regal on the rear quarter panel.

Postons Buick also has them. Use a phillips screwdriver that has a 90 degree bend in it and put a rag or tape on the window glass to keep from scratching it. Follow directions already posted, take your time and you should not have any problems. Takes maybe 1 - 1.5 hours per side start to...

I currently have a 93 octane TT chip with my slightly modified stock setup and have no complaints at all but I am in the process of switching over to the same type of combo you want to change to and was told that the Extender chip is the way to go. This comes from some of the locals here that...

PM'd you re: A pillar. Thanx, Roy

If you prefer BNIB try Full Throttle Speed

Thank you.

ARGH ! As usual, a simple job turns into a difficult one. Hooked up the boost lines to add my Auto Meter boost gauge to the car tonight. Attached the ground wire and just needed to attach the light wire to a power source to finish the job. After reading that you could tap into the...

I just looked at mine and the driver side has the screw on top of the visor (side nearest headliner) and the pass side has the screw towards the seat, so I guess they are not mirror images of each other. Looks like they sent the correct set back (unless mine are wrong too). Cheers

ebay # 370055793633 Offering ported maf ends. Is it hype or would it actually improve flow and performance ? Also I thought you had to use at least 1 screen on a maf

I was thinking of installing the airlift rear airbags . I know that one would do but should I just get 2 and run different pressures in them (harder on pass)? Do the airbags affect cornering at all ?

Just wanted to update and thank everyone for their input. Ended up having to cut the line, remove oil pressure switch and remove the brass block entirely. Then had to heat the rounded nut up with a propane torch to remove it. Put everything all back together tonight but got too dark to test...

Is the brass block screwed on or pressure fit ? If it is pressure fit, do I need some type of gasket or sealer to reinstall it ? Never had this part off before

Hello all. Thank you for the replies so far. I did try vice grips but the brass block turns with the nut and line as 1 complete unit. I am worried if I keep twisting, I may damage that brass block or the oil pressure switch that is attached to the brass block as well. I am...

I am trying to remove the oil feed line from the block to the turbo. I believe it is the original 21 year old line and the nut is mostly rounded off. Nut and tube turn as a complete unit even though I have sprayed it liberally with penetrating oil. Any advice on how I may be able to...

Payment sent as well Please LMK if there are any problems Thanx, Roy

I am interested in one of these as well. Do tyou ship to Canada ? Please PM me with details and payment instructions etc. Thanx