I have two 84 t types. One is a running car with original ingition module. Just bought the other due to it not having any spark. It has a new ignition module from O'Reillys and an adapter that requires you to remove the resistance wire and install new wire in its place from caspers. I also have...
Are there any OEM injectors that are an upgrade and used as an orginal injector on other cars? SVT fovus injectors are used by lots of mustang guys, just wondered if there anything out there? I have access to lots of wrecked late model cars with cheap prices. I do not want to have change...
I want to go to the buick nationals this weekend but work til noon. I live bout hour and half away. How late will racing or activities be going on at the track???
I need to replace my fuel regulator, any suggestions on getting an adjustable regulator. Are the rebuildable ones like accufab best or the holley style that are not rebuidable???
Gettn ready to replace my worn out stock regulator. I want to go with a adjustable regulator, any suggestions?
Are the rebuildable ones better than the holley style non rebuildable regulators??? I see several websites selling rebuildable regulators but never the rebuid kits??
Thanks
84 t...
I have to replace my cross over pipe on a 84 t type hot air. Will a intercooled car cross over pipe fit it? Are there benifits of a aftermarket cross over pipe?
I just replaced the cam sensor on my car with a Caspers cap. The light never lights even when rotated 360 degrees. I have 10.9 volts on the power wire. I have 6 volts on the trigger or signal wire all when it approaches the cut out spot in the interupter ring. A concern of mine is even when the...
I just replaced the cam sensor on my car with a Caspers cap. The light never lights even when rotated 360 degrees. I have 10.9 volts on the power wire. I have 6 volts on the trigger or signal wire all when it approaches the cut out spot in the interupter ring. A concern of mine is even when the...
I just replaced the cam sensor on my car with a Caspers cap. The light never lights even when rotated 360 degrees. I have 10.9 volts on the power wire. I have 6 volts on the trigger or signal wire all when it approaches the cut out spot in the interupter ring. A concern of mine is even when the...
Beside wiring betweenthe components, is there anything keep my t type from sparking besides ignition module/coil, crank sensor, and ECU? my car is exact opposite of cristine it keeps dieing and dieing.
Went to pull a part yard today. There we no 86-88 ignition modules and coils. After looking at some of the other 88 and up modules they appear simular. Has anyone tried to use these? I know since I have an 84 i would need a Caspers adapter or rewire it myself.
1984 T type 206/206 cam kit with lifters and springs from comp. fuel pump hot wire.
After doin cam break in and a several times of letting run in my garage i decide to go on a road test. I made it 4/10s of a mile before it died after sputtering and wont start for anything. I have spark and...
Guys I have set the cam sensor in my car several times with not much trouble. Got all the way back together with 206/206 cam and having some troubles. When setting voltage will drop from battery voltage to 6.2 to 5.9 volt at one spot but never lower. Shouldnt it drop to 0-2 volts, it always has...
Guys my nightmare car continues. The drivers side exhaust is almost twice the temp of the passengers side. All three cylinders are within 5 degrees of each other on both sides, just lot hotter on drivers side. The car is an 84 t type. gonna run the block and head casting to make sure engine and...
I am getting ready to install my valve springs that came in the comp cam kit 206/206. Assuming they are the same diameter do i need to put the "splash guards" off the original springs back on new springs?
Who sells the threaded oil galley plugs? Engine is apart for camshaft and wanna take care of this issue while its handy. Any guess on what size they are, I believe 5/8.