Im in the process of restoring a 87 T type that at one point had a small block installed in it and now that I'm putting another V6 I don't have the factory frame mounts for the motor anyone have a set or know where I can get a set this is really holding up the project any help would be greatly...
The problem is the scanmaster speed will jump around 20 30 mph it will read 31mph than jump to 60 than back down to 19 and so on
Posted from the TurboBuick.Com mobile app
The speedo was replaced before i bought it to the 140 mph it was 15 mph off from the day i got it. Its not bouncing but the scanmaster was correct before it sat i had checked it with my gps and it was dead on with that being said the tack is also off by 1200rpm on the cluster
Sent from my MB855...
My mph on my scanmaster started jumping around this weekend on its first ride after sitting for 2 months noticed torque converter was locking and unlocking in top gear is it the speed sensor in the trans or something else tia
Posted from the TurboBuick.Com mobile app
My son 14 goes to all the car meets and street racing hang outs with me and he is always looking for someone to race us he is always busting my chops for not racing so i guess it depends on how old they are and how safe you drive even my 10 month old grandson loves it when he hears the turbo...
Earl I know that but if the regulator is bad the pressure shoudnt drop if it still drops that means my pump is not flowing correctly
Posted from the TurboBuick.Com mobile app
So i have not narrowed it down yet and now my fuel pressure gauge bounces around at part and full throttle i got my new TT chip and injectors with a scanmaster i didn't put chip and injectors in but here are my numbers at full throttle
O2 1050
Knock 8.7°
At 62 mph
those are no good
If i crimp...