Recent content by MontemikeF

Well I figured it out it was a total mistake on my part I misread the tci valve body install instructions when it said discard inner piston of the servo I just read the first part that said "discard" it didnt mean the entire inner piston it says "discard sealing ring" so I went back into it and...

I dont think so I've had it on the lift and been under it and in it while the other person watches the gear selector move as the shifter is moved and ratcheted unless there is another way it could be in 2nd starting off with the selector still being in first on the trans.

I'm pretty sure it's the stock band but cant be totally sure I've rebuilt the trans 2 times this being the 2nd and never heard if the guy who built it replaced the band... but I will go more into finding those things out and see what I come up with thanks again man

Thanks and ok I will try that first before I buy an aftermarket servo. So if I put the spring and inner piston back in and still no 2nd gear that should tell me I should replace it. And if the servo does need to be replaced that doesn't necessarily mean that the band is bad also does it?

I just joined the forum because I'm having issues with my trans in my monte it's the stock 2004r just rebuilt about a year ago but not driven. I just put a tci manual reverse pattern valve body in it with the b&m mega shifter and it will not shift into 2nd when I ratchet it into 2nd but will go...