Recent content by Mike SY

Thanks Radius Mike :)

Hi, Could someone tell me where I can get the fitting on the drain side of the TE44 that has an AN fitting in stead of regular slip type, so I can use a braided line?? TIA Mike

bose Yes, the engine does stumble when I push the test button. But I have made 6- 1/4 mile passes plus numerous street tuning runs and the level in the bottle has only gone down about an inch??? I guess there is something wrong. Anyone??? Steve, are you out there? Mike

I installed the SMC kit on my Sy and it seems to be lasting forever. I have it set to come on at 14-15 #s and the pump speed is at 6-7. I heard mention that some guys use 10-12 oz. per run. I have 6 passes with a lot of short street tuning runs and the level has only dropped about an inch. Do...

Re: alky tuning Hey Brian, No I wasn't Datalogging, just monitering my EGT gauge, and saw it starting to move fast toward 1600. I was running the T22 program, but at 20#s of boost. I've been doing some testing on the street and have backed off the FP and brought the alky in a little later...

Hi Jay, Thanks for the reply. I do have a scanner and on the previous day I did a few runs. I only saw KR of 3-4 degrees on the shift. On Xylene my EGT's are 1550 through the lights, which seems to be optimal for my truck. On the alky I saw 1400, and that is why I dropped the FP 2#'s. The...

Hi Buick Brothers, I have a Syclone with a TE44, upgraded IC, and run the Ford 36# injectors. I just installed the SMC alky kit and filled the canister with denatured alcohol. I went to the track last night and my times were a little off but not by much. With only 3 runs it is hard to get in...