hensleyt's latest activity

  • hensleyt
    hensleyt replied to the thread Turbo Buick Parts/Supplies.
    What I should have said was next inline 87gn your up first.
  • hensleyt
    hensleyt replied to the thread Turbo Buick Parts/Supplies.
    im in Oracle see you tomorrow Tim
  • hensleyt
    it was the windshield on my car
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    If your going to be lad up for a will send it to Steve All the hard work is done
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    You have been at this for a week and haven’t disassembled anything.it’s time to breakout some tools check the relief valve pack the pump...
  • hensleyt
    hensleyt replied to the thread Rich condition.
    a good OBD1 code reader will work but most of us use the scan master or power logger my car with a TT chip is in that 10-11 range tell...
  • hensleyt
    hensleyt replied to the thread Rich condition.
    first dose it have a scammaster ? Reds is a old chip most will replace it with a TT chip. missing with the idle screw will mess up your...
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    you do not have to remove the front cover to take the pump apart, its very simple ,don't worry about the gears going back to the same...
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    dose your new gage show oil pressure? when it primes it will be hardtop hold on to the drill. I think it time to tear into the pump.
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    And dose it have the adjustable dodad on it? From TA performance? Is this a stroked 3.8 ?
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    PS most use Vaseline , I prefer engine assembly grease. Vaseline is for you lips and engine assembly lube is for will your engine.
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    I’m not the best at putting a full sentence together. The paper gasket between the block and pickup can suck air and not prime. And...
  • hensleyt
    hensleyt replied to the thread Trouble with engine prime.
    Have you checked the oil pickup gasket in the pan ? And pickup ? It’s been sitting for 15 years
  • hensleyt
    hensleyt replied to the thread Champion ported heads.
    No you won’t Is the old car do for a valve job? Or just looking to add a little pep to its step
  • hensleyt
    Picking a cam is almost like picking a oil Why pick a cam favoring intake? You not looking to run much boost? Intake valve is a little...
Top