Recent content by Darkside8889

nevermind, found the answer to my question

Anyone know where the location for VATS is on the TTA bin? Can't find it and my tunercat and tunerpro defs don't have it

Your O2's are suppost to swing around a certian point when out of PE mode. I forgot exactly what the value was, but it corresponds to stoich (14.7 AFR). A BLM of 140 means your ECM is adding fuel to get it to stay swinging around that value at idle to achieve a 14.7 AFR.

Sounds like a bad MAF to me. Unplug it and see if the car runs better at part throttle, just don't get on it. It'll let the ECM run off of the default values instead of taking bogus readings. Improper fueling caused by a bad MAF can cause mis-firing which could explain the code 42 Another...

If your SES is on pull the codes from the ECM by the ALDL connector. That'll give you a better clue as to what the issue is.

Found the answer to my question, which is what I thought... 200R4 has 27 spline input shaft instead of 30 like on the later 700's, otherwise it would work

I can get a good deal on a 10" 3500 lockup stall, which is what I was getting ready to order anyway. Problem is it was a 700R4 converter behind a SBC. The guy that runs the shop though it would bolt up in my TTA, will it?

Not complaining, I love your kit:biggrin: ... I just didn't see a seal kit on your site so I wondered if there was one, or if maybe someone knew of an easy replacement. I'll give you a ring monday. Thanks

Is there a seal kit for the progressive pump? Mine starts leaking after the car has sat for a few hours:(

This still for sale?

I'm interested for my TTA I'm on 50# injectors and a razor alchy kit, 3500 stall coming soon Would I need to modify my flanges or anything or would this be a unbolt old turbo and line, bolt new one in thing?

Would it be a sin to say paint your TTA SOM? My TTA is up for painting soon and I've though about not going with white, nor wih factory decals. SOM, pace car door decals ghosted in, cowl hood with turbo ghosted on the sides and 01' - 02' WS6 rims. Car would look tight IMO. Then I...

Anyone have any experience with a kit like this? I've used their kits in my 700R4's before but never in the 200R4. Basically my 150,000 mile tranny is slipping real bad after the abuse I've been putting it through the past 5,000 miles. Don't have the $$$ to drop on getting one built, me and...

05's have the LS2 as said before. My buddy's 05 auto car ran 13.27@104, bone stock other than nittos at GIR last saturday. Think the DA was like -100 or something like that. Will be a good run

It was pegging it. Seems to be reading in the last 2 entried in MAF table 5. I have lowered these by almost 100gps (along with making changes in table 6 to kinda match) and still rich