Recent content by boostcreep

So the waveforms on the 'other' site are BS?? And here I thought I knew how to read them :o

If it helps to move the sensor, what is changing:confused:

Is this a stock steel pan or a aftermarket aluminum pan that you are using?

BB, you should go to the 'other' board (add an s to the end of turbobuick..if you know what I mean) and search for "cam sensor and timing Q" and read about how the cam sensor really works. Hope this helps. Nick

I've heard that the stock IC is only about 20% efficient at best. Bruce....is this what you measured for efficiency? Nick

I heard that someone converted the stock boost gauge to read out the O2. Sounds like a neat idea.... Nick

Intercooler delete...:eek: Nick

Yikes! Maybe you people should check out the 'other' board and do a search for ' Cam sensor and timing Q '. A little knowledge goes a long way....... Nick

I've heard that there is a one-off low Z driver that somebody made that is installed in the injector harness rather than having to modify the ECM all the time. Appearently this one is very different from what is offered on the net as it needs no heat sinking because it is supposed to be *very*...

I'm a little fuzzy on what batch fire mode is...could someone please explain this? Thanks Nick

Buy something that has a lifetime warranty. It seems that the coil packs are always taking a dump. I know someone has done an autopsy on the coil packs, and it sounds like they are constructed very poorly...the stock ones that is. Don't know about the aftermarket ones..... Nick

Curious.....when you get a code 42, does the car stall (est problem) or is it down on power (bypass problem)?? Nick

Have you been through the normal troubleshooting route? If not, look here..... http://www.vortexbuicks-etc.com/code_42.htm Nick

I see that someone posted something about maf screens over here...... http://www.efi-tuning.org/forum/index.php?act=ST&f=2&t=349&hl=& Nick

So if your are seeing 8 to 10 intake psi at part throttle, just exactly how much boost is the turbo putting out. I try to keep notes on this kind of stuff and this would be a nice addition. Nick