Boostian
Member
- Joined
- Jul 8, 2013
Ok, after some thinking and some assistance from my other thread, and mainly time constraints, I'm having my current exhaust fixed by professionals. They will be aligning everything, welding and installing new hangers, and adjusting the over-axel placement.'
I'm looking for any people have of the stock AND aftermarket hangers and locations. Right now I have the stock hanger coming onto my exhaust off the trans cross member, one right behind the muffler (that's not even hooked up), and a very horrible welded one near the exhaust tip.
Im looking for how it should be set up properly. The guy at the shop said he has only see one other Buick with the ATR single exhaust. The main problem i'm having is the entire center section of the ATR system twisting up towards the floor pan and making contact with it. This is happening because my test pipe is twisting where it meets up with my downpipe.
So.........if you have decent quality pictures of your hangers I can give to the shop id appreciate it. Thanks in advance.
(Oh, and if the pics are of an ATR single shot system, ill send you an e-hug, cause that would be even better)
I'm looking for any people have of the stock AND aftermarket hangers and locations. Right now I have the stock hanger coming onto my exhaust off the trans cross member, one right behind the muffler (that's not even hooked up), and a very horrible welded one near the exhaust tip.
Im looking for how it should be set up properly. The guy at the shop said he has only see one other Buick with the ATR single exhaust. The main problem i'm having is the entire center section of the ATR system twisting up towards the floor pan and making contact with it. This is happening because my test pipe is twisting where it meets up with my downpipe.
So.........if you have decent quality pictures of your hangers I can give to the shop id appreciate it. Thanks in advance.
(Oh, and if the pics are of an ATR single shot system, ill send you an e-hug, cause that would be even better)