HelloBozos
A Bozo in Buick
- Joined
- Feb 9, 2011
1-20-12. Drivers Side is ready for paint,Passenger's still in smoothing phase. The A-Pillers have cracks!!! We'er welding an leading them back in. I'm adding the GNX rear seat brace to stop future cracking an adding a 8 point cage!
![IMG_0044a.jpg IMG_0044a.jpg](https://turbobuick-data.community.forum/attachments/126/126517-cb6b956d0d8800b74bbd68f70d54389c.jpg)
![IMG_0048.jpg IMG_0048.jpg](https://turbobuick-data.community.forum/attachments/126/126518-49b779e5cbd1c55e79f09a8c1dcccf4e.jpg)
![IMG_0047.jpg IMG_0047.jpg](https://turbobuick-data.community.forum/attachments/126/126520-ba4f217a151aed4653ba8e86c7503a90.jpg)
![IMG_0051.jpg IMG_0051.jpg](https://turbobuick-data.community.forum/attachments/126/126522-817bab1f901d5b497c29dcf9f2aadfaa.jpg)
![b.jpg b.jpg](https://turbobuick-data.community.forum/attachments/126/126523-838dfc4ec1c0b8ace20c31a2e1687a2e.jpg)
GNX fender tunnels are in, waiting on the "Real" fiberglass Louvers to arrive ,I went with best dash caps out to fix the famous mid-upper dash split .Ordering a complete set of Seat upholstery front an back. Direction on the build is to have fully looking GNX exterior an interior, but with a Drive line from Hell underneath it all...8^)
After the body is all ready the car get's stripped down for the frame work,re-enforcing the rear control arm mounts,boxing the frame,adding the cage mounts...
Enjoy!
![IMG_0044a.jpg IMG_0044a.jpg](https://turbobuick-data.community.forum/attachments/126/126517-cb6b956d0d8800b74bbd68f70d54389c.jpg)
![IMG_0048.jpg IMG_0048.jpg](https://turbobuick-data.community.forum/attachments/126/126518-49b779e5cbd1c55e79f09a8c1dcccf4e.jpg)
![IMG_0047.jpg IMG_0047.jpg](https://turbobuick-data.community.forum/attachments/126/126520-ba4f217a151aed4653ba8e86c7503a90.jpg)
![IMG_0051.jpg IMG_0051.jpg](https://turbobuick-data.community.forum/attachments/126/126522-817bab1f901d5b497c29dcf9f2aadfaa.jpg)
![b.jpg b.jpg](https://turbobuick-data.community.forum/attachments/126/126523-838dfc4ec1c0b8ace20c31a2e1687a2e.jpg)
GNX fender tunnels are in, waiting on the "Real" fiberglass Louvers to arrive ,I went with best dash caps out to fix the famous mid-upper dash split .Ordering a complete set of Seat upholstery front an back. Direction on the build is to have fully looking GNX exterior an interior, but with a Drive line from Hell underneath it all...8^)
After the body is all ready the car get's stripped down for the frame work,re-enforcing the rear control arm mounts,boxing the frame,adding the cage mounts...
Enjoy!